|
|
Finally after years of notching sheetmetal with an angle grinder, I scored a manual corner notcher over the weekend. Its in near new condition. '93 model Enco. Its made in Tiawan. I really wanted a USA made Tennsmith but this was a great deal$, cuts very accurate and I really needed one this Monday morning. I didn't actually find it, someone responded to my "wanted" ad on Craigslist and contacted me Sunday.It was a good week to get this notcher after getting a new cold saw and new shop lights installed. happy drive to work this morning.
Reply:Looks good do you have some pics of the cuts?Millermatic 252Syncrowave 200Cutmaster 42
Reply:Looks like a nice piece of equipment!!! Whats the thickest material have you cut with it?? I wish we had one at our shop, notching galvanized with a cut off wheel isnt the most pleasnt smell in the morning MillerMatic 252Miller Dialarc 250Smith Oxy/acetlyne Cutting OutfitHossfeld BenderTubing Roller
Reply:Jimmy pop - I see a cache of prepatinated panels behind the notcher.Are they for practice or product? Opus
Reply:Originally Posted by OPUS FERROJimmy pop - I see a cache of prepatinated panels behind the notcher.Are they for practice or product? Opus
Reply:It's hard to see but it's 100% accurate according to my Starrett square. |
|
发表于 2021-8-31 22:14:50