Stair Brackets

admin

Helping a buddy put together a set of spiral stairs he built for a client and he needed a few brackets to catch some of the upper treads. templatesyep, that's snow!www.facebook.com/gstreetworksLincoln Power Mig 210 Miller Maxstar 150Lincoln Idealarc 250/250 G Street Works LLC
Reply:the sun was shining in the back of my hood...., the wind was blowing, hood fogged from the cold...out of practice..........and plenty more excuses...www.facebook.com/gstreetworksLincoln Power Mig 210 Miller Maxstar 150Lincoln Idealarc 250/250 G Street Works LLC
Reply:pre-paint, I will post a couple pics after we install them...www.facebook.com/gstreetworksLincoln Power Mig 210 Miller Maxstar 150Lincoln Idealarc 250/250 G Street Works LLC
Reply:Those welds look great, no need for excuses! And I am glad the customer was so nice to provide a wooden template. Much better than having to figure out what he does really mean out of some crappy drawinds on a napkin!
Reply:Looks good.  Nice welds.  Looks like it was pretty cold outside!!!
Reply:Thanks! yeah, about 20F degrees with a steady breeze....www.facebook.com/gstreetworksLincoln Power Mig 210 Miller Maxstar 150Lincoln Idealarc 250/250 G Street Works LLC
Reply:Installed them! www.facebook.com/gstreetworksLincoln Power Mig 210 Miller Maxstar 150Lincoln Idealarc 250/250 G Street Works LLC
Reply:Very nice!GravelThe difference between theory and practice is that in theory there is no difference.
Reply:Thanks! I take no credit for the stair design, my buddy is a top shelf carpenter.www.facebook.com/gstreetworksLincoln Power Mig 210 Miller Maxstar 150Lincoln Idealarc 250/250 G Street Works LLC
Reply:Originally Posted by jcwelderThanks! I take no credit for the stair design, my buddy is a top shelf carpenter.
Reply:My friend had a spiral staircase into the basement of his stackwall house, and they tried to enclose the risers like you would normally see on stairs. This made the center of the stairs very narrow and a little treacherous. I like this design much better, at least you still have a whole step in the center. Nice work.250 amp Miller DialArc AC/DC StickF-225 amp Forney AC Stick230 amp Sears AC StickLincoln 180C MIGVictor Medalist 350 O/ACut 50 PlasmaLes
Reply:I can't imagine that staircase EVER passing a building inspection.JimJim,I don't mean to be argumentative and cantankerous,but I am getting older and a bit crotchety!Addendum; AND CRANKY
Reply:Originally Posted by welditforyouI can't imagine that staircase EVER passing a building inspection.Jim
Reply:It looks very nice, big wood, are those threaded pipe flanges into between the risers?
Reply:Originally Posted by welditforyouI can't imagine that staircase EVER passing a building inspection.Jim
Reply:Originally Posted by BrianCIt looks very nice, big wood, are those threaded pipe flanges into between the risers?