Let's see your tig torches.

admin

As I'm bored again.I use ck torchesSent from my SM-G920P using Tapatalk
Reply:i'm embarrassed to show the croquet mallet that passes for a torch on my ta186.i.u.o.e. # 15queens, ny and sunny fla
Reply:Originally Posted by docwelderi'm embarrassed to show the croquet mallet that passes for a torch on my ta186.
Reply:Here is my Frankenstein torch I put together to run from my LM300.   But it gives me multiple options for setup and use.  Connected into the 17 pin plug.   Thumb amperage and contractor button both work.  Tiger Sales:  AHP Distributor    www.tigersalesco.comAHP200x; AHP 160ST; MM350P,  Spoolmatic 30A; Everlast PowerTig 185; Thermal Dynamics 60i plasma.  For Sale:  Cobra Mig 250 w/ Push-pull gun.  Lincoln Wirematic 250
Reply:Well,Here's my no-name, $17, series 17 series, flex head, gas-cooled torch, with a stubby gas lens, no special insulator used, a wedge CK collet, a pricey CK pistol grip hand amptrol device (logo removed), and pigskin cable cover.Last edited by C. Livingstone; 04-10-2016 at 01:07 PM.
Reply:heres my ck wp20. It's needs a new cover and I'm still on the original collet and collet body. My big mess of tungstensLast edited by motolife313; 04-10-2016 at 02:37 PM.
Reply:
Reply:What cfh of argon do you run with that setup? I would think 45+
Reply:Originally Posted by motolife313What cfh of argon do you run with that setup? I would think 45+
Reply:That's pretty good for that big cup to only need 40 cfh. Air cooled torches suck big time tho
Reply:Jimmy pop: that looks like a toxicfab cup. Is it?
Reply:Originally Posted by TigMonsterAs I'm bored again.I use ck torchesSent from my SM-G920P using Tapatalk
Reply:Originally Posted by That Guy ThereJimmy pop: that looks like a toxicfab cup. Is it?
Reply:Sadly, only one gets used. I was going through a "phase", lol. 1st on WeldingWeb to have a scrolling sig! HTP Invertig 400HTP Invertig 221HTP ProPulse 300HTP ProPulse 200 x2HTP ProPulse 220MTSHTP Inverarc 200TLP HTP Microcut 875SC
Reply:Originally Posted by OscarI think you're missing an insulator on the CK17V FX.  Shouldn't be able to see brass.
Reply:Originally Posted by Jimmy_popyes. I'm alittle worried as the guy (Collin Toxicfab) seems to have disappeared or lost interest in marketing welding and rad welding supplies. He is off on another venture of the month. I have a few cups in my toolbox but I am not confident he will be around when i need to re-order. In searching an alternative, I just don't like the design of the furick cups. The glass cup is bulky and the diffuser just looks unprofessional and haphazard. I can say Collin's cup works and in made very well which is how I like all my tools.
Reply:Originally Posted by OscarSadly, only one gets used. I was going through a "phase", lol.