Hypertherm powermax 45

admin

Brand new powermax hypertherm 45, comes with all the tips and manuals etc.  $1550 shipped
Reply:Where are you located and can you post some pictures of the powermax 45
Reply:It's located in Maine, photobuckets not letting me upload pics onto here, can email pics if needed. But it's a brand new unit
Reply:New price $1250 shipped
Reply:I'll take it, subject to getting a few pictures etc., and confirming you have all the factory parts and manuals.PM me your contact information, please.
Reply:Here's my local suppliers site. NEW $1550, FREE SHIPPING http://www.weldersupply.com/
Reply:Originally Posted by Mr. MooseI'll take it, subject to getting a few pictures etc., and confirming you have all the factory parts and manuals.PM me your contact information, please.
Reply:Originally Posted by BD1Here's my local suppliers site. NEW $1550, FREE SHIPPING http://www.weldersupply.com/
Reply:PM SentMillerMatic 211Smith O/A portable.
Reply:"I need this gone"...Sounds like the police are hot on the trail.No photos.  No details (like Serial #---so a buyer could determine if there's warranty).  New poster with no track record.Sorry, but there's just too many questions here.Syncro 250 DX Dynasty 200 DXMM 251 w/30A SG XMT 304 w/714 Feeder & Optima PulserHH187Dialarc 250 AC/DCHypertherm PM 1250Smith, Harris, Victor O/ASmith and Thermco Gas MixersAccess to a full fab shop with CNC Plasma, Water Jet, etc.
Reply:Honestly, I think i'd have to agree with sundown here...Buyer beware. Although this is new, Id guess Plasma cutters, especially the good ones, are hot items. Think about it, if you were going to burglarize a welding shop, what would you want to take? The 300 pound idealarc, or something thats small, lightweight, portable, and valuable? I'd ask a lot of questions, IMHO.[Account Abandoned 8/8/16 Please Do Not Attempt Contact Or Expect A Reply]. See you on YouTube! -ChuckE2009
Reply:Put our mind at ease, post the serial # please, maybe a picture or 2, and 1 of your purchase receipt. Not that much to ask if your legit."Si Vis Pacem Para Bellum"Lincoln Idealarc 250 AC/DCMillermatic 251   Syncrowave 300   30A spoolgunLincoln MP210Hypertherm 45(2) LN 25(2) Lincoln Weldanpower 225 CV(4) SA200   1 short hood    SA250    SAM 400
Reply:Hi Ya Sreetskatertd You may want to post some of the info folks requested. As for the pictures if you have them on your computer you should be able to go to Advanced Reply  and attach the pictures as well as whatever else you have.Posting your location might also help find a local buyer that may want to come to your location and look at the plasma cutter.If If want to post your location, show your personal avatar, or have a signature on each post telling fellow members where you are located; an avatar of you or your shop, and a signature telling fellow members what types of equipment you have, you can do it all by following these steps:1. Locate and click on USER CP2. Under YOUR CONTROL PANEL, YOUR PROFILE, click on EDIT YOUR DETAILS3. In the EDIT YOUR DETAILS, you can enter Optional Information and Additional Information such as your Location (an other info)4. While in USER CP you can explore some of the other functions - Avatar: you can have picture of you, your shop, your wife, children, dog, etc (keep it clean- no nudes)- Signature: you can list all your equipment, a link to your shop, or maybe some witty sayingCo-Own CNC shop:Miller :1251 plasma cutter, MaxStar 700 TIG/Stick, & XMT 456 Multiprocess Welder.&  2 Hypertherm HPR260's Plasma CutterSorry I had a bad stroke but now I am back.