|
|
I asked this on another forum and I figured if I am going to get an answer to this it would be on this forum.I have been looking for an aluminum **** knob with a 2.25" or a 2.5" diameter, and I cannot seem to find one. All that I have been able to find stop at a 2" diameter for whatever reason. Does anyone have the ability to make one? I do not have access to a lathe or whatever else you would need to make it. I also need it to be tapped for a 16x1.5 thread. I dont know why I cannot find one on all of the interwebz
Reply:I would guess over half the active members here can make what you seek. Sadly, I am not one of them.
Reply:Thats why I posted it here haha
Reply:Do the commercially-available shift knobs meet your needs? There are plenty of them out there for sale. I've been looking for a shift knob myself lately (I don't really like the stock knob on the Honda Fit I just bought). Lots of aluminum 'racing' knobs out there. Not sure I want to have an aluminum knob...my impression is that it would be hot in the sun and cold in the winter.Oh...and sorry...while I could, theoretically make the knob, with my mini lathe, I'm not really very practiced with it yet.KevKevin / Machine_Punk from The Aerodrome Studio - Lincoln PowerMIG 210 MP - Meco N Midget w/custom welding station - Vintage Victor 100Current Projects: The Aerodrome Studio
Reply:Originally Posted by Machine_PunkDo the commercially-available shift knobs meet your needs? There are plenty of them out there for sale. I've been looking for a shift knob myself lately (I don't really like the stock knob on the Honda Fit I just bought). Lots of aluminum 'racing' knobs out there. Not sure I want to have an aluminum knob...my impression is that it would be hot in the sun and cold in the winter.Oh...and sorry...while I could, theoretically make the knob, with my mini lathe, I'm not really very practiced with it yet.Kev
Reply:Originally Posted by Machine_Punk. Not sure I want to have an aluminum knob...my impression is that it would be hot in the sun and cold in the winter.
Reply:2" Solid Aluminum Ball (Lot of 1) $16.00 http://www.craigballsales.com/2-soli...-lot-of-1.html
Reply:Here is one, maybe it would work?Item #11-30-HBLAluminum Hollow Sphere. 3" DiameterHollow Aluminum Sphere. .118" Thickness, 3" Outside Diameter with a Single 1/8" Weep Hole, .30 lbs. Price $44.09 Quantity http://www.kingmetals.com/Catalog/It...ItemNumber=275
Reply:ThreadkillerEveryone with a question akin to yours, needs to know www.ReidSupply.com.OpusLast edited by OPUS FERRO; 03-09-2013 at 12:26 AM.Reason: Forgot the dubbs on the Web Address.
Reply:I dont know if im having a brain fart or what but i dont understand what you mean with that website?
Reply:Do you need a 100% ball or will it have a shoulder like most shift balls so the boot has a grab point? A sample photo would help.Sent you a PM.
Reply:Originally Posted by forhireDo you need a 100% ball or will it have a shoulder like most shift balls so the boot has a grab point? A sample photo would help.Sent you a PM.
Reply:Firebird / TA ??If you don't want to stand behind our Troops, feel free to stand in front of them.
Reply:2000 Camaro actually haha
Reply:I was close..... f-body familyIf you don't want to stand behind our Troops, feel free to stand in front of them. |
|
发表于 2021-8-31 22:06:09