|
|
Got to play with this awesome machine for a few hours tonight.Got some decent mig results, I ran a lot more, flat and overhead, but my phone died on me.....The inductance setting is nice....Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Runs 7018 beautifully.Does not run 5p well at all.Mig .030 was really smooth, I wish I had taken more pics......Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Had mine 3 mos it's amazing. My first welder and I couldn't ask for more so far. -beautiful welds here by the wayRespect Your Welders
Reply:NICE!!!! its always fun to play with a new toy............Of all the things I lost I miss my mind the most...I know just enough about everything to be dangerous......You cant cure stupid..only kill it...
Reply:Didn't some of these have wire feeding issues or drive motor problems?did you tig with it?Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer
Reply:They are a great machine for the money. Millers multimatic is getting its arse kicked by this at about 1/2 the price of blueSent from my dumb smartphoneTeach Ag Mech - Mike At Home:Lincoln Electric AC225Miller Challenger 172Gas AxeWork:eclectic bunch of 90's vintage blue boxes
Reply:Originally Posted by GambleDidn't some of these have wire feeding issues or drive motor problems?did you tig with it?
Reply:Originally Posted by GambleDidn't some of these have wire feeding issues or drive motor problems?did you tig with it?
Reply:Originally Posted by PB17654Yes, i'm on my 2nd one. The first one that I had, when the wire feed was rolling it was obvious that something was wrong. The top piece that is clamped down was moving up and down. The higher you turned the wire feed speed the more noticeable it was. I looked at it and it looked to me that a part of the mechanism was machined out of round. I brought it to my LWS and the service guy ordered and replaced some parts. I brought it home and it wasn't much better. I emailed Lincoln and a gentleman called me and told me that he would send me a new machine right away. This was a while back when the machines were very hard to get. He said that my warranty machine comes before any ordered machines, so I got it in less than a week. This machine is fine and the guy that took care of my problem at Lincoln was great.A side note, I'm on my 2nd AlphaTig too, so needless to say I'm not having very good luck when it comes to buying new welders.
Reply:Originally Posted by soutthpawWhat generation and what was the issue with your Alphatig. Did you feel you received good customer service from AHP. Being I've been reviewing these machines, I like to keep track of any issues when I see them and very interested in how they deal with customers. Both good and bad
Reply:Love my 210 mp waiting on my tig pedal plug as wellMiller Xmt 350Lincoln Ln-25Ahp 200xSmith Gas Mixer AR/HTig is my Kung FuThrowing down dimes and weaving aboutInstagram http://instagram.com/[email protected]
Reply:Originally Posted by WeldorWesLove my 210 mp waiting on my tig pedal plug as well
Reply:I already have a lincoln pedal in my parts stash so no need for a scc pedalMiller Xmt 350Lincoln Ln-25Ahp 200xSmith Gas Mixer AR/HTig is my Kung FuThrowing down dimes and weaving aboutInstagram http://instagram.com/[email protected] |
|
发表于 2021-8-31 22:06:09