Pics are one of a pair of driveway gates. Framework 2x2, scroll and latice 3/4×3/4×.125. I fabbed scroll jig, torch heat and hand bent scroll work. S scrolls are 126 inches of tube 44 inches high and 22 inches wide. I cut and welded ends for taper. 800ft of 3/4 tube in this project. Gates are 11 1/2ft tall abd 16ft wide. Floating kick panels are not paint. Panels are brushed copper clear coated. Used up a couple #5 acetylene and over 20lbs .035 mig wire.
Attached Images Equipment:2 old paws2 eyes (that don't look so good)1 bad back
Reply:Last pics
Attached Images Equipment:2 old paws2 eyes (that don't look so good)1 bad back
Reply:Nice!Lincoln 330MPXLincoln Power Mig 256Lincoln LN-25X Wire FeederMagnum PRO 250LX GT Spool GunModified Lincoln 225¼ Ton of Torches OFC-A OFG-AAir Carbon Arc GougingEverlast 62i Plasma CutterIngersoll Rand Type 30 14hpInstagram: #Freebird Welds
Reply:Very nice. I hate that repetitive work making components.
Reply:Good looking gate.Dave
Reply:Classy gate, very artistic.
Reply:Very well done!Miller Trailblazer Pro 350DMiller Suitcase MIGMiller Spectrum 2050Miller Syncrowave 250DXLincoln 210MP
发表于 2022-5-19 11:02:50
