|
|
I needed an easily moveable grinder stand for my welding tables and this is what I came up with
in retrospect it actually looks a little goofy....Last edited by Lis2323; 4 Weeks Ago at 11:50 AM.:
Reply:that will work and last a long time
I'm sure it will be copied many time.DIY CNC Plasma table USB BOB Price THCHypertherm 65Everlast PowerTig 255 EXTMiler 180 Mig13" metal latheMill/ DrillECT, ECT,
Reply:I don't think it looks like Mickey at all. lolLincoln 330MPXLincoln Power Mig 256Lincoln LN-25X Wire FeederMagnum PRO 250LX GT Spool GunModified Lincoln 225¼ Ton of Torches OFC-A OFG-AAir Carbon Arc GougingEverlast 62i Plasma CutterIngersoll Rand Type 30 14hpInstagram: #Freebird Welds
Reply:.... maybe Minnie...The harder you fall, the higher you bounce...250 amp Miller DialArc AC/DC StickF-225 amp Forney AC Stick230 amp Sears AC StickLincoln 180C MIGVictor Medalist 350 O/ACut 50 PlasmaLes
Reply:Maybe it is Mickey M. after fight with Mike T.Dave
Reply:I like it, drop in a hole and ready to go
Dave J.Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~ Syncro 350Invertec v250-sThermal Arc 161 and 300MM210DialarcTried being normal once, didn't take....I think it was a Tuesday.
Reply:I just set the grinder on weld table.It is big and flat too.Dave
Originally Posted by whtbaron
.... maybe Minnie...
Reply:
Originally Posted by MinnesotaDave
I like it, drop in a hole and ready to go
Reply:Both Minnie and Mickey have the same birthday 🎂 Dave
Originally Posted by whtbaron
.... maybe Minnie...
Reply:For a table with no holes, you could use the same design on a 20 lb magnet.The harder you fall, the higher you bounce...250 amp Miller DialArc AC/DC StickF-225 amp Forney AC Stick230 amp Sears AC StickLincoln 180C MIGVictor Medalist 350 O/ACut 50 PlasmaLes
Reply:
Originally Posted by whtbaron
For a table with no holes, you could use the same design on a 20 lb magnet.
Reply:I have use and own a mag drill since before 1970. It is tool that sits a lot today but I can put on the work bench for drill and tapping hole. I also use it for line boring backhoes and other earth moving equipment. Very handy tool when need.Dave
Originally Posted by Lis2323
I went more than 50 years without a mag drill. Never even knew about them (and DC welders) until later in life. Now that I finally have one and dont really need one, Im gonna drill holes.
Sent from my iPad using Tapatalk
Reply:Simple yet very effective.Lincoln, ESAB, Thermal Dynamics, Victor, Miller, Dewalt, Makita, Kalamzoo. Hand tools, power tools, welding and cutting tools.
Reply:Only effective if the grinder has a guard.GlenHobart Champion 16Hobart Hefty CC/CVHobart Handler 140Lotos LTP5000D
Reply:
Originally Posted by ArcTan
Only effective if the grinder has a guard.
Reply:
Originally Posted by ArcTan
Only effective if the grinder has a guard.
Reply:M-i-c-k-e-y ____ g-r-i-n-d
"USMCPOP" First-born son: KIA Iraq 1/26/05Syncrowave 250 w/ Coolmate 3Dialarc 250, Idealarc 250SP-175 +Firepower TIG 160S (gave the TA 161 STL to the son)Lincwelder AC180C (1952)Victor & Smith O/A torchesMiller spot welder
Reply:Here's a shot of the ones I pick up at Princess Auto when they're on sale for cheap. These are 10 lb magnets and they work "ok"... I'd hold out for 20 lb ones in the future though. The 10's won't hold the sawzall up if the batteries are attached. On the 4.5" grinders they work with either the guards on or off. Maybe Mickey just needs rabbit ears...
The harder you fall, the higher you bounce...250 amp Miller DialArc AC/DC StickF-225 amp Forney AC Stick230 amp Sears AC StickLincoln 180C MIGVictor Medalist 350 O/ACut 50 PlasmaLes
Reply:Looks good.I did feild work and no place for tool hangers. About the only hanger I used was for stinger or mig gun. No more than a disk harrow for base and pipe for stand all so used latter or scaffold .Dave
Originally Posted by whtbaron
Here's a shot of the ones I pick up at Princess Auto when they're on sale for cheap. These are 10 lb magnets and they work "ok"... I'd hold out for 20 lb ones in the future though. The 10's won't hold the sawzall up if the batteries are attached. On the 4.5" grinders they work with either the guards on or off. Maybe Mickey just needs rabbit ears...
Reply:
Originally Posted by whtbaron
Here's a shot of the ones I pick up at Princess Auto when they're on sale for cheap. These are 10 lb magnets and they work "ok"... I'd hold out for 20 lb ones in the future though. ]
Reply:I was looking at those... think the sale is over soon too...half price until April 24Last edited by whtbaron; 3 Weeks Ago at 11:08 PM.The harder you fall, the higher you bounce...250 amp Miller DialArc AC/DC StickF-225 amp Forney AC Stick230 amp Sears AC StickLincoln 180C MIGVictor Medalist 350 O/ACut 50 PlasmaLes
Reply:
Originally Posted by whtbaron
I was looking at those... think the sale is over soon too...
Reply:
Originally Posted by Lis2323
I went more than 50 years without a mag drill. Never even knew about them (and DC welders) until later in life. Now that I finally have one and don’t “really” need one, I’m gonna drill holes.
Sent from my iPad using Tapatalk
Reply:
Originally Posted by farmersammm
You really never know you need one..............until you need one. Handy, but in my shop tends to gather dust........until I need it
Reply:
Originally Posted by whtbaron
I think my shop dust needs one too... "Didn't feel like spending $30 on gas to save $15."I rarely get into Wpg to go to the store... I rely heavily on the free shipping . Just order 20 of them...
Originally Posted by Lis2323
nope. If i order online they offer free shipping to my store. lol Sent from my iPhone using Tapatalk
Reply:At least you can keep ordering and telling them you'll pick it up in 6 weeks until you make it worth the trip...The harder you fall, the higher you bounce...250 amp Miller DialArc AC/DC StickF-225 amp Forney AC Stick230 amp Sears AC StickLincoln 180C MIGVictor Medalist 350 O/ACut 50 PlasmaLes |
|
发表于 2022-5-19 11:02:25