|
|
I have a 110 Schumacher mig welder model #90441. Long story short, the wire speed dial is broken off flush and I can't adjust wire speed. Does anyone know where to get a replacement part. I will need the whole part. Just the knob will not fix it. Thanks in advance for any help.
Reply:We had a Clarke wire welder with the same problem, the shaft was plastic i heated an old screwdriver blade and pushed it into the shaft to make a slot in it. Just used a screwdriver to adjust it after it cooled off until the welder finally died. |
|
发表于 2021-9-1 23:14:53