Discuz! Board

 找回密码
 立即注册
搜索
热搜: 活动 交友 discuz
查看: 6|回复: 0

weld rust

[复制链接]

9万

主题

9万

帖子

29万

积分

论坛元老

Rank: 8Rank: 8

积分
293221
发表于 2021-9-1 01:01:42 | 显示全部楼层 |阅读模式
Will a weld rust if you don't paint it?  I spot welded some spacers for a shelf (all zinc metal parts) that's going inside of my cargo van - with a lincoln mig sp-135 with innershield wire.Dave
Reply:Yep they'll rust eventually. Not bad in a van but sooner or later. Ya know there are a few different brands of zinc paints in rattle cans that are designed for touch up on things like this. I'd think one of the low end types would work fine for you here.
Reply:Yes  the weld will rust in time even inside your cargo van.  I would brush it off and spray a little aluminum paint on each weld  it will match the coated parts as close as anything will.Good luck:J.W.
Reply:The best thing I have found to prevent rust is Por 15. It is some great stuff. It is nasty, costs a lot, but works great. Always use gloves when painting this stuff on, if you get it on you, it takes weeks to get off. It brushes on and dries to a great looking finish. It can be sanded and painted over. It does not like UV.Earl
Reply:Ivy guy, try some cold galv spray. Most weld shop suppliers carry it and its mil- spec quality so you know it will work.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|小黑屋|DiscuzX

GMT+8, 2025-12-20 01:24 , Processed in 0.093089 second(s), 18 queries .

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表