Tig pictures

admin

Some 1.5" sqaure tubing...First shot is table legs, sorry not really a visible weld... Just a pretty #4 finish.Process is, Fuse, sanding disc, buffing disc, buffing wheel to put grain back(pictured), scotch bright to hide differencesThird shot 1.5"sqr tube 90*....Thoughts?(Yes I noticved the pinhole).
Reply:look ok to me..(personally i'd space the "dips" a little more)and just work on the tie-off..stop the weld..tap the pedal and add filler...go around in a small circle with the torch..add another drop and repeat...walk the flame off the end and you've done it!!...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Space the drips? This was constant fill, no petal just scratch.Yea I can walk the flame off at the end its no biggy to not get pin holes. Sometimes you get lazy
Reply:Yea I can walk the flame off at the end its no biggy to not get pin holes. Sometimes you get lazy (quote)thats no excuse  its something you should do everytime reguardless..thats the "small stuff" that seperates a welder from a WELDER...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:looking good to me, cant wait to see it all finished up. summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.