|
|
this is the project for this week. a rack to hold concrete forms and expansion joint for one of our crews. "Retreat hell, were just fighting in the other direction"Miller Trailblazer 302, Extreme 12 VS, Dimension 400, Spectrum 375, HF 251D-1, Milermatic 251 w/ spoolgun Hypertherm 1000Lincoln sp 1702000 F-450 to haul it
Reply:No pics viewable...John - fabricator extraordinaire, car nut!- bleeding Miller blue! http://www.weldfabzone.com
Reply:sorry micro try thesethe ladder rack i built yesterday.since all the coins are taken i took a 1/2" 13 nutthe cradle for the expansion jointcutting expanded metal for brakingkind of hard to brake and snap photos at the same timeformed and sitting in the cradleclose up of weld on the expansion metali will finish it up in the am. got a new phone with a camera, now i can finally post pics too. hope these work micro.Last edited by backuproller; 04-03-2007 at 08:21 PM."Retreat hell, were just fighting in the other direction"Miller Trailblazer 302, Extreme 12 VS, Dimension 400, Spectrum 375, HF 251D-1, Milermatic 251 w/ spoolgun Hypertherm 1000Lincoln sp 1702000 F-450 to haul it
Reply:Yep, those work good, nice work !John - fabricator extraordinaire, car nut!- bleeding Miller blue! http://www.weldfabzone.com
Reply:Looks good Hope it fits. J/k |
|
发表于 2021-9-1 00:33:05