new welder gets a cart

admin

Made from 100% recycled steel, including pallet rack dividers, shelf legs, and the leg of an old toolbox stand.  The bottle holder is unfinished until I get a bottle, (I like to measure twice and cut once) . I may need to go and get some wider casters, the ones I have tacked on are salvaged off a 150# welder but seem weak to me. In progress but a good start!the designbottle holder/platformholds this up good and solidI used this welder (FCAW) for the tabletop and small tubing, and for the main square tube I used good old 7018, 5/16 wall is a little much for the 110v mig.
Reply:I like it....but the plate for the gas looks a little on the small side, or is just my eyes!
Reply:Originally Posted by steve28I like it....but the plate for the gas looks a little on the small side, or is just my eyes!
Reply:Originally Posted by ramblerx15I was planning on a 80cf bottle which is allegedly 36" x 7.5 dia.
Reply:Originally Posted by phila.renewalWhere do you find your scrap?  Scrap prices are so high around here the shopping cart pushing scrap picker guys leave anybody else absolutely nothing.
Reply:Nice job! I like the 100% recycled steel part, too.Warning: I have been wrong before!New small workshop, small MIG, oxyacetylene set with a DHC-2000 that I'm learning to use and really like. Life is good!Typos are there for those that look for them. I try to do something for everybody.
Reply:Finally got it finished, wider wheels from HF, a 80 cf bottle from IOC, and a couple spray bombs from the 99cent store. Looks semi-professional!   Attached Images
Reply:Couple more pics I have the Dragster sittin down below Attached Images