|
|
I was wondering if anyone has ever attempted anything like this on the cheap. I am not attempting to make anything complicated or anything that would hold alot of weight. I got the idea of using the circular ball bearing cage from a lazy susan my wife had. Then I thought well if I could find a large diameter bearing (I.E. Wheel bearing) maybe I could sandwhich that between two plates to make something that rotates. What I am trying to accomplish is the welding of pipe to a plate. The trick is is that the welds between the plate and pipe need to look good. I was thinking if I could build it on the cheap I could have a friend spin (slowly of course) the unit while I welded.... Again these are just thoughts but as usual I will welcome any thoughts or ideas. Thanks,Chris
Reply:maybe use a electric can opener with a belt and pulley ?
Reply:A member on here just completed one. Run a search and you'll find it. He documented it really well.John - fabricator extraordinaire, car nut!- bleeding Miller blue! http://www.weldfabzone.com |
|
发表于 2021-9-1 00:32:18