aluminum welder carts

admin

File this in the "it took you how long to finish these?" catagory.These were started well before Little League Season began, but now that my coaching duties are over, I finally found the time to finish them off.They're made for the most part from 2x4, 1/8" wall aluminum tube and 1/8" sheet (all scrap material from work).   Next item on the "to be built" docket is a rolling cart to hold the stick welder, plasma cutter and a toolbox for the plasma cables and such. Attached ImagesThere are no small projects
Reply:Holy beefy welding carts batman!!!!!Looks sick man  Come try it out and stay a while.
Reply:Originally Posted by rustywranglerHoly beefy welding carts batman!!
Reply:Those look great.  Nice design.  Now lets see the plasma/arc cart come to life.
Reply:very nice design.....  I might actually have to borrow that one for my small tig machine I need a taller cart for.I'm a Lover, Fighter, Wild horse Rider, and a pretty good welding man......
Reply:Very heavy duty, I wish I had that much scrap alum sitting around. John -  fabricator extraordinaire, car nut!-  bleeding Miller blue! http://www.weldfabzone.com
Reply:Looks good!
Reply:Very nice..But lets go...Its "Show Us The Welds Time!!"This far away viewing leaves alot to be desired... ...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Super beefy design.  However, without some sort of ledge around the tabletop, I fear the nice, new Lincoln welder will do a reverse one and a half somersault, with three and a half twists, and end up on the concrete in the pike position.  Story of my life; perhaps not yours.WeldingWeb forum--now more sophomoric banter than anything else!
Reply:Nice heavy duty carts. they call that scrap huh?DavidReal world weldin.  When I grow up I want to be a tig weldor.
Reply:man wish i had access to scrap like that nice job i love aluminum work350P 30A spool gun cut master 51  syncro 250 other stuff " take a dog off the street and make him prosper and he will not bite you sad the same cannot be said for man" i didnt use punctuation just to piss you off
Reply:Originally Posted by 69 chevySuper beefy design.  However, without some sort of ledge around the tabletop, I fear the nice, new Lincoln welder will do a reverse one and a half somersault, with three and a half twists, and end up on the concrete in the pike position.  Story of my life; perhaps not yours.
Reply:Originally Posted by imagineerI installed riv-nuts in the bump-outs in the bottom of the welders and have each MIG unit bolted down to the cart.
Reply:Originally Posted by 69 chevyOK, my fears are allayed.  Did you think of adding hooks to hang the cables?
Reply:those are really cool! "Ask not for whom the bone bones, it bones for thee" - Bender
Reply:Nice carts!!
Reply:Those machines must be really heavy! Ideas Without Action are Folly
Reply:I am saving that design, I like it...My Sync200 would look nice on one, and room for a water cooler under it.  Now I just need a lot of scrap.Nice work.Me!
Reply:Oh, one question:Where did you get the knobs that hold the tank band on?  They look nice.Me!
Reply:Originally Posted by Me!Oh, one question:Where did you get the knobs that hold the tank band on?  They look nice.