Need a backup tig tig

admin

Now my Dynasty is in the shop and will be back  who knows when I am thinking about a backup machine as am stuck with a job half done. My projects are usually on light aluminum1/8 to 3/16 max. The Dynasty in the shop is 3 yrs. old with very little use, I have a Econotigthat also is on the blink so am looking at the Lincoln 175 tig ac/dc. I like a button on the torch instead of the amptrol . can the amperage be set on the machine  and contactor be controlled with the button on these machines?Thanks for any info on the Lincoln small tig machine.
Reply:Been using the heck out of a Longevity TigWeld 250 ac/dc for about 6 months now. Not a single problem and I am really liking this machine. I also have a Miller Syncrowave 200 as a backup machine. It was my only tig but the Longevity  is easier and quicker to get on location and set up. IMHO.From the desk of Kevin CaronTrying to be the best me I can!www.kevincaron.comAHP Alpha Tig 200x MillerMatic 251Miller Syncrowave 200
Reply:The following link can help you about using an Arc Start Switch, and setting the amperage at the Lincoln 175 AcDc as you like,http://www.lincolnelectric.com/asset...478-5/e335.pdfMauricio
Reply:Thanks, Very good information.
Reply:How can I find a dealer for Lincoln,they all seem to push Miller. Thanks again
Reply:Hi,You can find Distributors and Service, searching athttp://www.lincolnelectric.com/en-us...s/locator.aspxMauricio