No welding but it lifts higher

admin

than my floor jack. Only took me two yrs to realize I can lift the front of the riders I service higher w/ the hyd table I bought to work on push mowers. Just one 5/16" hole and a bolt was all I needed. Sure helps get those decks higher for the impact wrench to remove blades for sharpening.    One correction: It doesn't lift 36", it's 36" above the floor when all the way up.                                            MikeLast edited by mla2ofus; 06-24-2010 at 10:52 PM.Ol' Stonebreaker  "Experience is the name everyone gives to their mistakes"Hobart G-213 portableMiller 175 migMiller thunderbolt ac/dc stick Victor O/A setupMakita chop saw
Reply:niceeee!
Reply:Good deal. Everytime I crawl around getting the blades off and back on I end up being attacked by legions of those microscopic ants. ."The things that will destroy America are prosperity at any price, peace at any price, safety first instead of duty first, the love of soft living and the get rich quick theory of life." -Theodore Roosevelt
Reply:Originally Posted by SandyGood deal. Everytime I crawl around getting the blades off and back on I end up being attacked by legions of those microscopic ants. .
Reply:Look at something for years, and don't realize the possibilities until the fateful day  Been there, done that, and generally deserve a dope slap for not seeing it earlier"Any day above ground is a good day"http://www.farmersamm.com/