Figured i would post a few pics of this cart i made for a buddy. Dont have any pics of it in use, but a quarter midget sits on top of it to roll it around in the pits. Sheet metal on the bottom is to hold tools and such and a tire rack on the side.
Reply:Also heres a ramp gate i made for one of my old trailers.
Reply:how did you put the shifter cart wheels on with just that one bolt? dont they mount with a 4x3 lug pattern? it looks good and so does the trailer gate. good work. Everyone alright that was in that truck in pic 5 second post?
Reply:Those wheels actually just have a hub with bearings in them. That all thread has three lock nuts in that square tubing that fits tight in it. Theres one on the end of the all thread and two right next to eachother behind the washer. All the lock nuts were welded to the all thread to keep them from moving and the washer was weded to the all thread and the nut and the square tubing. Pretty cool design i thot. And yes I was the only one driving that truck and i was just fine. Driving down the highway and traffic was backed up through an intersection in left lane and I was cruisin in the right lane and a guy cut across between traffic he couldnt see me and i couldnt see him. I had a green light but he said he had an arrow so both of us had to pay for our own.Last edited by intimidator782; 12-08-2010 at 11:11 AM.
发表于 2021-8-31 23:45:03