Outfitting CNC table with a DOME REGULATOR

admin

Does anyone here have any experience with dome regulators.I am wanting to outfit my CNC oxy/fuel burning table with them.  I can't find any real information on the web other than a brief overview of the regulator itself. Nothing about how to plumb the system or how to interface it with the table.IF IT WORKS, DON'T FIX IT2 Lincoln CV-300 / LN-7 GMALinde-VI 253,400 & 450 w/MIG35 feedersCNC Table with Oxweld O/A & Hypertherm 1250G3Lincoln Ranger GXT 250Hobart-MicroWire 300ESAB Heliarc 161ESAB-Mobilemaster 2 CC/CV Feeders& more
Reply:The Dome load regulator has to have a pilot regulator to adjust the deliver pressure.    Most dome loaded regulator have a 1/4'npt fitting.  To plumb, just run 1/4" hose from the pilot regulator to the dome loaded regulator.   With a hose connecting the outlet pressure of a pilot regulator to the dome loaded regulator you can change the delivery pressure of the dome regulator remotely.If you have more question, send me a PM or email.JimOAdoctorwww.regulatortorchrepair.com