Device Tree -- AKA peripheral holder

admin

Something I worked on yesterday.  Had too many devices to fit on my table, and so they ended up on top of my table, which made it useless.  This is bigger than I have needs for right now, but I did that so I can continue to expand.I built a little cart at the bottom and attached a double-sided a-frame to it.  Made clamps with receiver hitch to attach/hang on the angle iron.  Works really well.One pic is of a bracket I cut out.  Looks like a rocket ship, but it isn't.  The lines in the bracket were relief cuts as some of the bends were with a clamp and hammer.Pics may not be in any particular order..... Attached ImagesThe Lord has declared, "This is my work and my glory--to bring to pass the immortality and eternal life of man"  Moses 1:39Link: My name is John, and I am a member of The Church of Jesus Christ of Latter-Day Saints.-- ColdCreekWorks.com --
Reply:more pics Attached ImagesThe Lord has declared, "This is my work and my glory--to bring to pass the immortality and eternal life of man"  Moses 1:39Link: My name is John, and I am a member of The Church of Jesus Christ of Latter-Day Saints.-- ColdCreekWorks.com --
Reply:and yet more . . . . Attached ImagesThe Lord has declared, "This is my work and my glory--to bring to pass the immortality and eternal life of man"  Moses 1:39Link: My name is John, and I am a member of The Church of Jesus Christ of Latter-Day Saints.-- ColdCreekWorks.com --
Reply:not done yet.... last pics and a video . . . . Attached ImagesThe Lord has declared, "This is my work and my glory--to bring to pass the immortality and eternal life of man"  Moses 1:39Link: My name is John, and I am a member of The Church of Jesus Christ of Latter-Day Saints.-- ColdCreekWorks.com --
Reply:oops.... sorry about the repeat pic.Here is the videoThe Lord has declared, "This is my work and my glory--to bring to pass the immortality and eternal life of man"  Moses 1:39Link: My name is John, and I am a member of The Church of Jesus Christ of Latter-Day Saints.-- ColdCreekWorks.com --
Reply:That's slick...very well thought out design.Miller Dynasty 200DXMillermatic 210 w/ Spoolmate 3035Hypertherm Powermax 380JD Squared Model 32Multiple fabrication tools & equipmentFull Powder Coating Setup
Reply:Originally Posted by millerfabThat's slick...very well thought out design.
Reply:Looks BA!  Very smart idea especially if a shop doesn't have a lot of room, or doesn't use certain things all the time.JoeMiller 140 Autoset (2010)Miller Syncrowave 250 (1996)
Reply:Very creative and practical. It gives me a starting point on ways to organize and build out my shop.  Thanks for the video and your thoughts on why you did it. Good job!
Reply:VERY NICE!!!This is design is perfect for my shop, and I'll copy it later this year. I think I might add a roller for use as a extension work piece support when using my chop saw. Your design makes it easy to move the 'roller/support' to and from the saw. Cutting on the floor is a pain.