teaching myself

admin

Here is a few beads.  I am not sure how much you can tell from photos but any advice would be helpful.Uploaded with ImageShack.us
Reply:ProcessSettings EquipmentMaterialFillerAre all things you should include, otherwise we are just guessing.
Reply:Originally Posted by Fat BastardProcessSettings EquipmentMaterialFillerAre all things you should include, otherwise we are just guessing.
Reply:Originally Posted by welderShane+2. We would love to help you, please tell us the following thats listed.
Reply:Settings seem OK but I would go to a 3/32" Tungston and use 1/16" filler.3/32" is too big for what you are doing..What exactly is this again?Beveled plate or DOM?Looks like plate from here.....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:both plate onto dom tubing.  I will try the suggestions and see the difference, thanks
Reply:Originally Posted by zapsterSettings seem OK but I would go to a 3/32" Tungston and use 1/16" filler.3/32" is too big for what you are doing..What exactly is this again?Beveled plate or DOM?Looks like plate from here.....zap!
Reply:Ahhhhh I see it now..Kinda confusing..Nevertheless 3/32" is too large....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Okay moved down to 1/16 filler. It was much easier everything else stayed the same.Uploaded with ImageShack.us