Does anyone know where I can find replacement hose for the HTP cooler?I feel its some kind of metric size possibly?Ive tried a couple different hoses3/8 5/16And its either too tight or too loose. Id like about 6 feet if I can get itMiller 211Hypertherm PM 451961 Lincoln Idealarc 250HTP 221 True Wisdom only comes from Pain.
Reply:5/16" is tight, so 8.5mm would be better if available. But I made 5/16" work. 1st on WeldingWeb to have a scrolling sig! HTP Invertig 400HTP Invertig 221HTP ProPulse 300HTP ProPulse 200 x2HTP ProPulse 220MTSHTP Inverarc 200TLP HTP Microcut 875SC
Reply:looks to be 8mm ID.5/16 will be slightly smaller but should fit .a negligible 0.06 mm or 0.003 in smaller.mcmaster and grainger have metric stuff available.
发表于 2021-8-31 16:58:39