|
|
I picked up a gem of a L-tec this past summer for $500 w/owner bottle & 4 33# spools, helmet, and a bag full of glass/tips/nozzles/liners.Ive noticed its a little difficult to get a hold of the extra parts (i think i may need a drive roll). It got me thinking i should get a stock pile of parts for this since i plan on keeping it.What should i order to make sure i have what i need down the road?Ive been looking through the manual here:http://esabna.com/literature/Arc%20E...F-15-087-P.pdfIts got all the part #'s listed...but im not sure what to order.
Reply:Great machine, I used to have one. There is a complete list of the voltages at each tap setting in one of the threads here. I would recommend just watching ebay for a Bernard Euro Connector Centerfire gun and switch to centerfire consumables if the current gun is questionable. Otherwise there is not much u would need if u got the correct size drive rolls for the wire u plan to use. Innovat corp does PC Board repairs for that machine if u ever need it. They did my wire feed board when I had it...Tiger Sales: AHP Distributor www.tigersalesco.comAHP200x; AHP 160ST; MM350P, Spoolmatic 30A; Everlast PowerTig 185; Thermal Dynamics 60i plasma. For Sale: Cobra Mig 250 w/ Push-pull gun. Lincoln Wirematic 250 |
|
发表于 2021-8-31 23:01:28