this is awesome

admin

Reply:Wow - and he comments and says he thinks the welds are Pretty good !!!!
Reply:I like how he says a few broke welds are to be expected just as long as it doesn't fall off.I think he needs a bigger welder and a little practice.
Reply:This would be a good "HOW NOT TO DO" video. I can't believe his generation thinks they need to video everything thing they do and post online. Why? Other than to be laughed at, there is no point.He sure does not know anything about welding.Burt _____________________Miller Syncrowave 250Millermatic 211Miller 375 Plasma Cutter Hobart Handler 12010FtDrillBit.com
Reply:Isn't that barefoot Danny? We don't need another thread about him.
Reply:One thing is for sure. Those clarke welders suck.....I was actually thinking of getting one at one time. Glad I didn't! I think the end result might have been a little better with a stickweld 250 and some 6011s.....even with his experience level.
Reply:Sad, what a waste of rod and electricity . Someone should advise him to weld with eyes open. I don't remembering ever being that bad . He should start with yard art where there is less chance of someone getting hurt.
Reply:Please don't post this stuff.  If I wanted to look at videos of pigeon poo I'd make videos of my own stuff.- MondoMember, AWSLincoln ProMIG 140Lincoln AC TombstoneCraftsman Lathe 12 x 24 c1935Atlas MFC Horizontal MillCraftsman Commercial Lathe 12 x 36 c1970- - - I'll just keep on keepin' on.
Reply:At least he started with junk and didn't ruin any good stuff.Except for the bumblebee.
Reply:I think the bumblebee saw the welds and committed suicide."USMCPOP" First-born son: KIA  Iraq 1/26/05Syncrowave 250 w/ Coolmate 3Dialarc 250, Idealarc 250SP-175 +Firepower TIG 160S (gave the TA 161 STL to the son)Lincwelder AC180C (1952)Victor & Smith O/A torchesMiller spot welder
Reply:Originally Posted by forhireIsn't that barefoot Danny? We don't need another thread about him.
Reply:Originally Posted by OldendumI think the bumblebee saw the welds and committed suicide.
Reply:Originally Posted by BistineauYou are CORRECT Sir. I looked in the bottom section after viewing this fiasco, and there he was, Dannys Cam. So he is still after it, after the major flammage he got on here. He should apply to Hobart School of welding as an instructor.
Reply:They are like a train wreck, just have to keep watching to see what will happen next.......Disclaimer; "I am just an a$$hole welder, don't take it personally ."
Reply:Favorite new term I learned....stalactighting.Used in a sentence"Well I need to fill this void, bout time for some stalactighting"Made my day so much better!Some blue machinesSome red machineslots of heavy steel
Reply:I thought we weren't allowed to talk about Danny anymore?There are no problems. There are only solutions. It's your duty to determine the right one.Hobart Handler 210Airco 225 Amp MSM Stinger
Reply:Yeah, I thought this guy got the internet equivalent of "tarred and feathered" for his trailer video debacle...
Reply:Man...that is an awesome video and my first exposure to Danny. Wow! I thought I was gonna pee myself. I have actually seen welding like that. Very scary that those people don't know that they're effing idiots....POVERTY...is the Mother of InventionMillermatic 211Millermatic 140Miller Thunderbolt XLArcOne 100STS inverter w/TIGThermal Dynamics 38XL Victor Oxy/AcetyleneJancy Slugger Holemaker IIJet 5x6 BandsawNever enough time & sleep.
Reply:Hey our old buddy is still at it. If you cant fix it with a hammer, it must be an electrical problem."Boy, everyone starts with a full bag of luck and an empty bag of experience. The trick is to fill the bag of experience before the bag of luck is empty."-Grandad circa 1990ish
Reply:interresting that idiots are drawn to making videos..to me this work is in the category of religion, or sex with a fat chick..do what you want but keep it to yerself..
Reply:Originally Posted by wb4rtNow that's funny! I laughed out loud.
Reply:Come on guys, he was welding outside and the pigeons crapped on the joint. That's not weld, it's what happens when you feed aforementioned pigeon licorice and let him fly over you.....Mike
Reply:I thought his work table was first class tho.
Reply:My first ever weld was better than that. Not surprised all of his welds broke. Letting weld drip in, and welding on top of slag. Lol the gaps he had were hilarious.Miller Maxstar 200 SDPiperliner #10 Gold
Reply:I think If a pigeon crapped On my joint I'd have to roll another one.  MacTic Tic Tic Tic Tic Tic Tic... Not again.....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:His worst fear was that the bushing would let go?   REALLY????Miller 252Miller Bobcat 225Lincoln MigPak 1801959 Hyster forkliftHarris OA torch
Reply:he is getting better
Reply:These are good for filling a gap by the way, if you have a really big gap, just stick a few of them in there, as soon as you touch them with a stinger, they melt and fill it in...So many good one-liners in this vid.Hobbyist - At what point is a "hobby" out-of-control?
Reply:4% duty cycle........What is that.... like 25 seconds out of 10 minutes?HA HA.... This guy actually exists?Please tell me he meant this as a joke.....Precision TIG 185 and MP 210Bobcat 225NTCutmaster 42O/A tanks.... 2 Argon tanks...... 2 C25 TanksFacebook...... F2 Metal WorksETSY....... https://www.etsy.com/shop/F2MetalWorksF2MetalWorks.com....... http://www.f2metalworks.com/
Reply:Originally Posted by Fexal4% duty cycle........What is that.... like 25 seconds out of 10 minutes?HA HA.... This guy actually exists?Please tell me he meant this as a joke.....
Reply:I sure hope Tozzi is not sending him a t shirt!!!"Where's Stick man????????" - 7A749"SHHHHHH!! I sent him over to snag that MIC-4 while tbone wasn't looking!" - duaneb55"I have bought a few of Tbone's things unlike Stick-Man who helps himself" - TozziWelding"Stick-man"
Reply:Originally Posted by Fexal4% duty cycle........What is that.... like 25 seconds out of 10 minutes?HA HA.... This guy actually exists?Please tell me he meant this as a joke.....
Reply:Originally Posted by jamesyarbroughI guess he wanted a cheap 120 volt stick welder.All he really needs is a 220 volt AC buzzbox and some 6011s tho.  Prolly could have saved some bucks getting one off Craig's list and it might have held together a little better....atleast he would have got some penetration and the 6011 would of had a few less slag inclusions.Heck he might of even been better off with a 120 volt mig....
Reply:I will pay for the Tee Shirt from Tozzi, if Tozzi will send it to Danny.
Reply:some things are just painful and embarrassing to watch.   I couldnt watch all of it.   huge pos
Reply:So he used it and it broke apart after 1 hour.....I skipped to the end after seeing a little crap right away.1 HOUR!!  I'm shocked it lasted that long actually.I think he actually got worse from the trailer till now.Dave J.Dave J.Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~ Syncro 350Invertec v250-sThermal Arc 161 and 300MM210DialarcTried being normal once, didn't take....I think it was a Tuesday.
Reply:By the way, Thanks.I ended up reading back up on Danny and watching videos. Really wanna punch this asshat in the face now more than ever. If he dies from one of his failed welds. Is that accidental death or suicide? If you cant fix it with a hammer, it must be an electrical problem."Boy, everyone starts with a full bag of luck and an empty bag of experience. The trick is to fill the bag of experience before the bag of luck is empty."-Grandad circa 1990ish
Reply:Originally Posted by larpheadIf he dies from one of his failed welds. Is that accidental death or suicide?
Reply:I think what bothers me more than the poor welds and failures (at least he will learn when it breaks) is the fact that he never removes the slag. Even if the welds suck chip that crap off dude!  On one of his vidoes he pointed the camera at a slag covered weld and said "see I'm getting better" You don't know unless you chip it!
Reply:Originally Posted by zapsterTic Tic Tic Tic Tic Tic Tic... Not again.....zap!
Reply:Originally Posted by Stick-manI sure hope Tozzi is not sending him a t shirt!!!
Reply:You mean it broke?!At least we now know what to do with all those rod stubs.  Use them to fill gaps (4:18)  when letting the "weld fall down in there" (3:28) process just isn't good enough.Oh Danny, Danny, Danny . . .MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:Originally Posted by FORTEALLOYWhat's a Tozzi Tee Shirt? Did I miss something?
Reply:You can actually see his strike anywhere, double back welding "technique" in action in his how to build a generator video.  Explains a lot.Last edited by duaneb55; 08-21-2013 at 03:18 PM.MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:Why do I keep insisting on loosing brain cells watching this garbage? It's like a train wreck. I just can't look away.There are no problems. There are only solutions. It's your duty to determine the right one.Hobart Handler 210Airco 225 Amp MSM Stinger
Reply:Originally Posted by jamesyarbrough
Reply:Originally Posted by ThorsHammerWhy do I keep insisting on loosing brain cells watching this garbage? It's like a train wreck. I just can't look away.
Reply:Originally Posted by KelvinI think he's pulling our leg. Nobody is that much of a butcher and doesn't know it! Hey, at least he hammered some PVC pipe in there as a bushing. It was undoubtedly the strongest thing in his entire "fabrication."
Reply:I think the thing that pisses me off the most about this dumbass is. Well other than the arrogance and ignorance.  He obviously has his own property and house. I cant see him holding any type of job that would allow him to afford that on his own. So someone is supporting this douchebag.And here I am making $22hr, working everyday, paying rent on a crappy 1 bedroom apartment and (mostly because of a divorce) having a hellva time trying to finance a place to call my own. If you cant fix it with a hammer, it must be an electrical problem."Boy, everyone starts with a full bag of luck and an empty bag of experience. The trick is to fill the bag of experience before the bag of luck is empty."-Grandad circa 1990ish