HTP Mig 2400 Full Review + Torture Test (Video)

admin

Goodmorning, everyone! So, last february I picked up a nice Mig 2400 from HTP America... And when I got it, I decided that once I'd had a chance to get a feel for it, use it on some projects, and put it through its paces, I'd do a full review of it:I think its been a GREAT machine, and what do I like about it, you ask? In no particular order, here are some of the things I like about the unit:-European-Built-Excellent Gun, well made, nice feel and long reach-Ground clamp and lead that compliments the gun in terms of quality and reach-Industrial Strength "Double-Drive" feeding system-Trusty HTP Flowmeter-24 Heat Settings-Fit-And-Finish of the unit's cabinet and door... Its a little unoriginal (boxy) looking, but made exceptionally well-Simple Polarity-Changing Setup-"Weld Time" and "Pause Time" for skip welds, perfectly identical tacks, bad fit up, and good looking welds-Respectable Duty-Cycle-Bullet-Proof Transformer Power SourceI've found it to be well made, easy to use, and a great value for what you pay... Its the kind of machine thats "Inexpensive without being cheap", and that will put these guys on the map. I honestly feel like HTP might be the best kept secret in welding, and machines like this are why. I knew this was a quality welder, but I wanted to find out exactly how much abuse it can take... I'd welded with it last winter at -15 and it never skipped a beat, but exactly how long CAN it weld? I set out to find out... This machine has a 100% duty cycle at 140 amps, and maxed out, its a respectable 35% at 240 amps... So, I set it to 200 amps and started welding, and welding, and welding... I roasted a 10 pound spool of .035 as fast as possible, putting 112 passes down on 3/4" plate, just to see if it could. The flowmeter got a little frosty, and the gun got a little toasty, but the machine held up just fine. I defiantly give it a thumbs up.But, unfortunately, nothing's perfect, not even the beastly 2400. Although I don't have any serious complaints about the machine, there are a few things that I don't particularly like, such as:-Digital Readout that only works while the machine is welding-Door chart only covers one side of wire, per material thickness. This isn't *that* bad because the voltages are right, its just the WFS that you'll need to adjust yourself-No Hose Clamp... I'm pretty sure you're supposed to get one, but I had to buy my own... That being said, when the only problem I've had with this machine is having to shell out $0.99 for a piece of hardware, I'm not complaining.Overall, I feel this is a GREAT machine, and I'm looking forward to using mine well into the future. Well, I hope that about covers it... Enjoy the video, and have a good week everyone [Account Abandoned 8/8/16 Please Do Not Attempt Contact Or Expect A Reply]. See you on YouTube! -ChuckE2009
Reply:Take good care of htp. Seems like they are the best sponsor you have had to date.
Reply:I see you're still sporting that HTP CSV helmet.  Nice piece huh? 1st on WeldingWeb to have a scrolling sig! HTP Invertig 400HTP Invertig 221HTP ProPulse 300HTP ProPulse 200 x2HTP ProPulse 220MTSHTP Inverarc 200TLP HTP Microcut 875SC
Reply:Oscar, yes I still have and use it all the tine. Great hood!  James, I don't play favorites... But yeah, I have no complaints about dealing with them... They're known for being great to deal with! [Account Abandoned 8/8/16 Please Do Not Attempt Contact Or Expect A Reply]. See you on YouTube! -ChuckE2009
Reply:You know Lanse, if 1/3 of your subscribers donated $1, we could get you a 300DX and call it done. I'm willing to pony up $5.I should start a thread....
Reply:Originally Posted by rschreckYou know Lanse, if 1/3 of your subscribers donated $1, we could get you a 300DX and call it done. I'm willing to pony up $5.I should start a thread....
Reply:All the welding really got to you by the end of the video! I like your reviews always honest and thorough!! keep it up!
Reply:TaggedTA Arcmaster 300CM3XMT 304S22P12 suitcase feederX-Treme 12VSOptima pulserTA161SMaxstar 150STLHypertherm PM45OP setupStihl 020AVP, 039, 066 Magnum
Reply:Good video. If I didn't already own 4 MIG welders, I would seriously consider getting an HTP 2400.