Metal Stock - Everything must GO!!

admin

Moving and no longer have room for my metal stock for my welding hobby.  This includes my welding table, metal racks to hold my metal stock. AND my metal stock.  Below is a list of most items I have. This is most but not all.  This is a package deal and its a very good deal.  My loss is your gain.  I'm in Collierville which is near Memphis TN.  „« STAINLESS STEEL - Stainless Steel Round Bar 5/8 inch Dia. & 17" long. I have about 90 bars. „« STEEL: - HEAVY DUTY PIPE - 1.049 ID - SCHEDULE 80 -- I have various lengths. This stuff is thick!! About 60 pipes from 10 inches in length to 1 1/2 feet in length.5/8 STEEL SOLID ROUND BAR 12 FEET LONG - I have 45 polls, 12 feet long, 5/8 inch solid steel. STEEL TUBE - 1-5/8 OD x .134 wall Seamless Round Steel Tube - 24 tubes @ 12 feet long.1/4" x 1" Steel @ 12 feet long, I have 24 that are 12 feet long.Top rack has (not sure how many but quite a bit) 1/4" & 3/8" cold roll 12 feet long.  Also have other various sizes @ 12 feet long. 1 inch STEEL HEXAGON SOLID 12 FEET LONG I have one pole 12 feet long. Its a 1 inch solid steel hexagon. STEEL PLATE 8 inch x 24 inch x 1 inch I have 5 very heavy thick steel plates for sale. The measurements are approximately 8 inch x 24 inch and ONE inch thick. „« ALUMINUM: 1" x 1" 1/4 ALUMINUM solid 12 feet long I have fourteen SOLID Aluminum 1" by 1 1/4 inch that are 12 feet long. This is high quality aluminum. Series 7075 T7. I have TWO solid round 2" poles (6061) that are 12 feet long. ONE 9 foot long solid bar (6061) that is 2" 1/2 x 4" 1/2. I have fourteen 1" Hexagon poles (6061) that are 12 feet long. „« BRASS: I have TWO 1" BRASS HEXAGON SOLID bar 12 feet long First $1,500 takes everything.  Stock, racks and table. Attached ImagesLast edited by Burnit; 01-12-2009 at 10:33 AM.Reason: At request of OP
Reply:Wish i could but western Tennesse is a little to far from Western WA
Reply:Any sheet like 16 or 18 guage?
Reply:1500 is  cheap!!!  i just bought a 6X10 sheet of 10ga and spent over 400 dollars
Reply:Originally Posted by welderShaneAny sheet like 16 or 18 guage?
Reply:still for sale
Reply:Doug,Lotsa good stuff there and the price is certainly fair.  Think, though, that you need to change your "marketing strategy".Much of what you have is somewhat specialized and would not be used by (I'm guessing) 99% of the readers of this board.I would suggest you put together a mailer showing the material list and send it to all fab shops within a 200mi or so radius.  At the price you're asking, they may identify enough of the material that has forseeable use for them and be willing to parcel out the rest over time.I will print off the list of material and run it by the fab shop (Atlantic Metal Products) I deal with (consult for and have access to their equipment) here (VA).  They may be interested, but they won't be back to work til next Monday.  I will say though, that for most material such as what you have listed, they generally order for the job at hand.Keep us posted.Syncro 250 DX Dynasty 200 DXMM 251 w/30A SG XMT 304 w/714 Feeder & Optima PulserHH187Dialarc 250 AC/DCHypertherm PM 1250Smith, Harris, Victor O/ASmith and Thermco Gas MixersAccess to a full fab shop with CNC Plasma, Water Jet, etc.
Reply:Thanks for the advice.  I was hoping someone would jump at the deal just because it is priced right.   Still need it gone.
Reply:Advertise that on craigslist - http://memphis.craigslist.org/I would expect it will all go in a day. I would buy it all myself but the round-trip drive from New Hampshire would take a almost a week and cost me a fortune.   -MondoMember, AWSLincoln ProMIG 140Lincoln AC TombstoneCraftsman Lathe 12 x 24 c1935Atlas MFC Horizontal MillCraftsman Commercial Lathe 12 x 36 c1970- - - I'll just keep on keepin' on.
Reply:i can dream up projects to utilize that stock, problem is i already have projects pressing on me to get paid for that need to get done first.  hope all goes well.
Reply:would u sell just the tableComplete Fabrication Shop specializing in pipe fabrication. Also offering heavy steel fabrication and sheet metal work.
Reply:Originally Posted by scubaholicwould u sell just the table
Reply:Thread locked; offer is no longer available.Bob RosenbaumFormer PublisherPenton's WELDING Magazine