Which bend tech software for project

admin

I'm afraid I'm getting over my head on this one. A friend has asked me to make 2 sets of these for his jeeps. Look at the last picture http://www.ebay.com/itm/Jeep-CJ-Wran...-/251303503482orhttp://www.tntcustoms.com/Jeep_tube_...lareTJ/LJ.aspxI was thinking of the BEND TECH PRO or EZ3D http://www.bend-tech.com/products.htmNote I'm a dumb SOB. I'm afraid the pro is going to be too hard. I have been looking for an excuse to purchase the software.Dave ReberWadsworth Ohio
Reply:Dave, Go to Mittler brothers.com they have a nice program thats user friendly. Nice ppl to deal with as wellMiller 250DX HTP 221 DV AC/DCHenrob O-A Miller 180 MigMiller 150 Inverter   Hobart 10,000 Welder-Generator   Have a good day!!!
Reply:Thanks I will check them out.Please post pictures and info of the truck in avatar. Very coolDave ReberWadsworth Ohio
Reply:You might want to look at www.benditonline.com I have used it for a couple of projects, always with good results.Mike
Reply:Hey guys I went to Mittler brothers.com and have not found the software/program.Dave ReberWadsworth Ohio
Reply:http://www.mittlerbros.com/mittler-b...-software.html
Reply:dbotosThanks I found that spot I thought there was freeeeee software. That is bend tech software.Thanks Mike that is probably going to do the ticket!!!!!!!!!!!!!!!!!Dave ReberWadsworth Ohio
Reply:Get Bend Tech Pro. They have awesome customer service. And if you want to upgrade to SE down the road you can without having to buy at full price. For an extra fee they will add the Sheet Metal software. I used to use it a lot to draw out parts that i need to send off to be water jet cut (if you dont already have software for that)The best thing about bend tech is its Layout function. I can draw up very complicated parts. I can print a diagram that shows cut length and where to mark the starts of all the bends, angles, rotations ect. And i can hand it to an employee and they just cut, mark and run it through the bender. Parts come out PERFECT! You can print notch templates. Its well worth the money. That being said. The price for the fenders on the first link are rock bottom imho. I would have to charge at least triple if someone wanted me to build a single set.www.performancealuminumfabrication.com
Reply:Thanks Travisc454He has helped me a ton with various crap over the years so I will just charge for materials.I hope the software is easy cause I'm kind of slow.Dave ReberWadsworth Ohio