|
|
Now here's a find on ebay:http://cgi.ebay.com/Hypertherm-Indus...3A1%7C294%3A50This is one Heavy Industrial Hypertherm Plasma Cutter which I saw up for sale on Ebay a couple of months ago it was selling min bid $100,000.00. Of course the part making it hard is that you have to dismantle and remove it. I tried convincing my business partner this would be a great buy for our shop!! But he didn't see it my way since it had to be dismantled and removed by the buyer. Plus our cnc shop really doesn't have the extra room or business right now.But for a business wanting to get in on the floor of industrial plasma production this will get you there at a great price. ( and noooooo I am not selling this ebay item nor do I profit from its sale) Attached ImagesCo-Own CNC shop:Miller :1251 plasma cutter, MaxStar 700 TIG/Stick, & XMT 456 Multiprocess Welder.& 2 Hypertherm HPR260's Plasma CutterSorry I had a bad stroke but now I am back.
Reply:Its a Messer (Made in Menomonee Falls Wisconsin) cutting machine with an Allen Bradley 8200 series cnc, with a Hypertherm 750 Amp PAC500 nitrogen/water injection plasma. I may very well have helped sell this machine quite a few years ago!It's a great plasma for heavy stainless....1/4" through about 4" thickness, does not do well on steel by todays standards.Jim Colt
Reply:Jim Colt,Did you get involved in the sale of the Hypertherm/Messer unit installed at Atlantic Metal Products (Topping, VA) about 18 mos ago?That is an awesome piece of equipment. That, along with the water jet they have can handle just about anything my Hypertherm 1250 or 600 can't.I pretty much grew up with the father of the current owner. He was my next door neighbor when he owned Atlantic Steel Fabricators in Ashland, VA. Done quite a bit of consulting for them over the years.Just curious.Syncro 250 DX Dynasty 200 DXMM 251 w/30A SG XMT 304 w/714 Feeder & Optima PulserHH187Dialarc 250 AC/DCHypertherm PM 1250Smith, Harris, Victor O/ASmith and Thermco Gas MixersAccess to a full fab shop with CNC Plasma, Water Jet, etc.
Reply:No.....I don't have much direct involvement with Messer anymore....we have reps that work with each machine builder now.Jim
Reply:its down under 30000 now on ebay
Reply:Thats quite a price for something like that. But our cnc shop currently uses the Hypertherm HPR260 and we are very happy with its performance.Although we have given thought to possibly adding the HPR460XD to the shop.Last edited by specter; 03-11-2009 at 09:32 PM.Co-Own CNC shop:Miller :1251 plasma cutter, MaxStar 700 TIG/Stick, & XMT 456 Multiprocess Welder.& 2 Hypertherm HPR260's Plasma CutterSorry I had a bad stroke but now I am back.
Reply:Originally Posted by jimcoltIts a Messer (Made in Menomonee Falls Wisconsin) cutting machine with an Allen Bradley 8200 series cnc, with a Hypertherm 750 Amp PAC500 nitrogen/water injection plasma. I may very well have helped sell this machine quite a few years ago!It's a great plasma for heavy stainless....1/4" through about 4" thickness, does not do well on steel by todays standards.Jim Colt
Reply:Originally Posted by EutecticJohnMy mom is an Account Rep for Messer in Menomonee Falls and I work for MG Welding Products, next door. Jim, did you work here?
Reply:My mom is Sue Heebler. Been there for 20 years, retiring this month.
Reply:Tell her I said hi, and she's too young to retire!.....I'm sure she remembers me!Jim
Reply:Small world....I will do that Jim.
Reply:Hey Jim, Do you know Pat Belsole then?Matt Grandi
Reply:Of course....Pat is one of our District Sales Managers.Jim
Reply:I figured Jim. He's our Rep out in Harrisburg PA. I work for a small distributor called Dyeco Inc. Pat's a great guy.Matt |
|
发表于 2021-8-31 22:38:15