|
|
This might be the most portable one I've seen yet.Hmmm....Scary I know they've been around for some time now. Instructor mentioned "accidently" breaking them during the late 80's early 90's...i.e. pulling lines, plugs, chips etc...I guess there is always structural?http://www.youtube.com/user/IPWLfireflyI didn't think it was possible to move this fast!1981 Lincoln SA 200Miller Trailblazer 302gMiller 211 Mig Welder w/ AutosetI'm learning to stick metal together
Reply:Holy travel speed, Batman! That thing is haulin' a$$!!MM350P/Python/Q300MM175/Q300DialarcHFHTP MIG200PowCon300SMHypertherm380ThermalArc185Purox oaF350CrewCab4x4LoadNGo utilitybedBobcat250XMT304/Optima/SpoolmaticSuitcase12RC/Q300Suitcase8RC/Q400Passport/Q300Smith op
Reply:I make the root pass travel at 35-45 inches per minute, the hot and fill 23-25IPM and the cap a little slower yet.Maybe an inside pipe welder can post up on the narrow groove prep and possible parameters for wire feeds.It would take a load of pipe and fast setup ability to make it pay off though.Matt |
|
发表于 2021-8-31 22:36:39