Shaker pics

admin

Hey there having trouble sleeping tonight, so I decided to go through some old pics. I did some welding on this shaker for this shaker back in the summer. Added the top of the chute and the uprights. I didn't get to do my own cutting and fitting so the pieces were a bad fit up, half inch in places. Just ran some fill passes till flush and then weaved the cap. The guy was super happy with my work and I got to go back and work for him a lot the rest of the year.Nothing Ever Got Done By Quitting, Never Give Up.
Reply:That's a big shaker. City of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:I left a hole at the bottom for drainage, it looks scabby but better than it filling with water and freezing. It was 1/8th 7018, cant recall the amps, between 105-115 for those verts. Hanging on with one arm and reaching up, one of those akward positions.Nothing Ever Got Done By Quitting, Never Give Up.
Reply:It sure feels big when you are on top of it. I recall putting a few braces on that thing now too. Im not sure if he ever got it working the way he wanted to.Nothing Ever Got Done By Quitting, Never Give Up.
Reply:Now thats a movin and da shakin!Nice work!Miller Dynasty 200DXMiller Spectrum 250DMiller Millermatic 200Bunch of old blue dinosaurs....
Reply:Salt or pepper Bubble gumTooth pixDuct tapeBlack glueGBMF hammerScrew gun --bad battery (see above)
Reply:''Rock" salt Nothing Ever Got Done By Quitting, Never Give Up.