|
|
I have and am the only owner of the stick and mig welder. Both have been kept inside and not abused. They weld great and the price is firm on both units. The stick welder comes with plenty of rods and the mig has a 20# co2 bottle which is still on it's first bottle and second roll of wire. Buyer will pick up units and price is firm. $350 for the stick welder and $800 for mig welder.We are in Lebanon Missouri and can be emailed at [email protected] Cash only.
Reply:For that price, you can keep them. JohnSMAW,GMAW,FCAW,GTAW,SAW,PAC/PAW/OFCand Shielding Gases. There all here. :
Reply:You bet!!!! Have you tried looking at the new ones. I hope you have about $1600 for the mig and $500 for the same stick welder.
Reply:I buy, rebuild and resell them. JohnSMAW,GMAW,FCAW,GTAW,SAW,PAC/PAW/OFCand Shielding Gases. There all here. :
Reply:mechanic,I have to agree with Weldgault on this one (and I don't often agree with him).A new MM180 (Current Model) with shipping included can be purchased from IOC for $721. Also, a new Hobart 187 (which some say is a better Mig) can be had for around $650 with shipping included.A new (full warranty) Miller Thunderbolt AC/DC can be purchased from BR Welding for $511 (shipping included).There is a nice used Thunderbolt AC/DC listed on e-bay (with 25' leads) for $250.I personally cannot understand people's infatuation with the Thunderbolt machines. To me, you can buy a nice used Miller Dialarc 250 AC/DC for less than the price for a new Thunderbolt. No comparison between the two machines. The Dialarc has more output, better duty cycle, and is more of an industrial machine than is the Thunderbolt.Just my .02. I'm really not interested in either machine you are selling but thought you may be interested in what you're up against.Syncro 250 DX Dynasty 200 DXMM 251 w/30A SG XMT 304 w/714 Feeder & Optima PulserHH187Dialarc 250 AC/DCHypertherm PM 1250Smith, Harris, Victor O/ASmith and Thermco Gas MixersAccess to a full fab shop with CNC Plasma, Water Jet, etc.
Reply:I was at the Miller web site and the AC/DC stick welder is $600 and the mig is $1700. I really don't think I'm asking too much, and yes I will keep them and use them rather than give them away. Even selling them at my price I still have come up with more money to buy the new mig welder I'm looking at. So I will remove them from the web site as soon I find out how.
Reply:Originally Posted by mechanicI was at the Miller web site and the AC/DC stick welder is $600 and the mig is $1700. I really don't think I'm asking too much, and yes I will keep them and use them rather than give them away. Even selling them at my price I still have come up with more money to buy the new mig welder I'm looking at. So I will remove them from the web site as soon I find out how.
Reply:also (not that it matters now) the MM185 is a 200 amp machine...it was replaced by the MM210 so comparing it to a MM180 is not a good comparison...if you can find a MM185 with spool gun in good shape they can bring 800-$1000
Reply:Originally Posted by mechanicI was at the Miller web site and the AC/DC stick welder is $600 and the mig is $1700. I really don't think I'm asking too much, and yes I will keep them and use them rather than give them away. Even selling them at my price I still have come up with more money to buy the new mig welder I'm looking at. So I will remove them from the web site as soon I find out how.
Reply:KenH,This thread is from January 2008.ThurmondMiller Bobcat 3 Phase,26 series gas cooled TIG torchMiller Suitcase X-Treme 12VS17 Series Tig Torch for Solar Panel Powered WeldingOxy/Acetylene Torch rigEVERLAST PowerUltra 205P
Reply:Maybe time to change the TINY POST DATE FONT?
Reply:what ? |
|
发表于 2021-8-31 22:17:20