|
|
The seller wants $450 for the machine with 2 torches and foot pedal. He said its a ac dc machine. anyone vouch for this machine? thanksser # HF846515Last edited by loolagigi; 07-08-2012 at 04:25 PM.
Reply:also heres a lincoln arc ac/dc 125/225. is this a tig? any good?
Reply:Have you searched on the site for it?I have no experience with this welder but will break down all those posts that are so time consuming to read through-nobody will steal it-big amps single phase-it's a tank of a machine-will TIG-Zap use this machine, won't make you weld like himChime in if I missed anything.Tom
Reply:Originally Posted by loolagigiThe seller wants $450 for the machine with 2 torches and foot pedal. He said its a ac dc machine. anyone vouch for this machine? thanksser # HF846515
Reply:Originally Posted by zapsterGood deal get it!...zap!
Reply:I spoke to the owner. He said the machine has been inside. Was used 3 months ago but has no way for me to test it at his home. He said both torches are water cooled with tap water. Plus foot pedal has new cables. Going to look at it tomorrow. Anything I should look at? Thanks
Reply:I got the seller down to $350. Supposed to go look at it tomorrow.
Reply:I never negotiate before looking at the machine, it gives them time to reconsider selling, the pedal is worth @200 on ebay, and I bet there is more than $500 in copper in the thing.Dynasty 200DXPassport plus w/ spoolmate 100victor 315c oxy/(act and prop)Miller digital elitemilwaukee power tools
Reply:Got some clown selling one in this area for $1150. I think you are getting a great deal, even though I know 1150 is way too high for that machine.Zap, what is the 'Gold Star' designation on that machine? The local seller made mention of that gold star moniker also. First I'd heard of that.PapaLincoln Idealarc 250 (circa 1962)Lincoln Weldpak 155 w/Mig KitLincoln Squarewave TIG 175
Reply:Is the machine ok for home use?
Reply:It's OK for home use if you can supply enough current for it. You might get by with a 50A breaker running at the lower ranges. 60-70A would be more comfortable and 100A is ideal.See discussion here: http://weldingweb.com/vbb/showthread.php?t=63630"USMCPOP" First-born son: KIA Iraq 1/26/05Syncrowave 250 w/ Coolmate 3Dialarc 250, Idealarc 250SP-175 +Firepower TIG 160S (gave the TA 161 STL to the son)Lincwelder AC180C (1952)Victor & Smith O/A torchesMiller spot welder
Reply:sent you a PMI hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:Originally Posted by papaharley03Zap, what is the 'Gold Star' designation on that machine? The local seller made mention of that gold star moniker also. First I'd heard of that.Papa
Reply:I got the seller down to $350. Supposed to go look at it tomorrow.
Reply:Originally Posted by farmallI'd be on it like wrinkles on a fat chick at 350 ...
Reply:Originally Posted by OldendumIf it's like a 350 lb. fat chick, it ought to give you that "stack of salami" look right out of the box.
Reply:Why don't you have it in your truck yet? |
|
发表于 2021-8-31 22:16:21