Mig welding gloves

admin

Which one do you guys like the best? Burnt threw my pointer finger fairly quick with my lincoln ones
Reply:Originally Posted by Fadetoblack188Which one do you guys like the best? Burnt threw my pointer finger fairly quick with my lincoln ones
Reply:Originally Posted by 7A749I go thru gloves like no tomorrow when I'm working. I don't mess with trying to keep them perfect, I just go get another pair.
Reply:I use the cheap HF type. I hate them. I might as well be wearing mittens.
Reply:I've bought several pairs of gloves that had Lincoln on them, and they lasted pretty good.. They were $10.00 a pair.Then I found these at Harbor Freight..Harbor Freight 14" Welding Gloves3 pairs for $10.00, and they look just like the Lincoln gloves.Hobart Handler 190Hobart Spool-Gun 100Lincoln 225 ACMiller & Pipeliner HoodDewalt 14" Chopsaw, GrindersHarris O/AVictor TorchCustom Built O/A CartCustom Welding CartHeavy Duty 16 Speed Floor Drill PressPipe-BenderDrill Doctor
Reply:Yeah I think I may go with the pair smile posted.
Reply:Originally Posted by smilexelectricMiller came to my school and gave everyone a pair of these and wrote an article about our aluminum class we had. I have been using my pair for 2 years now and just ordered new ones on Friday. I use them about 3 times a week in school probably welding about 4 hours each day. They are stiff to start but once you break them in they have a real nice snug fit.Here is the link from cyberweld: http://store.cyberweld.com/miweglhedumi1.html
Reply:I'm probably gonna get ribbed for this, but after wearing out my first pair of Tillman gloves and needing a pair to help my buddy, I made a run to harbor freight and spent $8 on a pair I planned on using for a day. I fell In lover with them and yes they did burn up quicker than my tilmans, but hey $8! I went throgh 3 of the smaller spools of mig wire before I needed a new pair. So if you need a temporary or back up pair I would highly recommend harbor freight
Reply:Originally Posted by RoraI have heard good things about those and was thinking of ordering a pair with my next ADF helmet. Do they run large (or small for that matter?) I have big bear paws but short fingers and I hate having leftover length in the fingers where the extra material gets in the way, so glove sizing is always a challenge.
Reply:If your going through gloves a lot, I found a website that sells high quality gloves in bulk for a discounted price.  For instance their MIG welding gloves come 12pair/pack but if you need that many your only looking at $9 /pair.  Here is a link to their glove: http://serviceandsafety.com/product/...welding-glove/