Please evaluate these 4 beads.

admin

Hello All:I am still trying to get a decent bead on 14ga HRS. Sample size is 3" x 6" and was placed on top of my table (10ga HRS). I believe all 4 are too hot or I am moving too slow. The Modified HF171 was set to its minimum voltage tap. Lots of drop through as can be seen in the second picture, the numbers correspond to those on the front side. If there are any other obvious problems please feel free to comment. Been growing this skin for 71+ years so it is pretty thick. Thank you and take care. Burt Attached ImagesHF DUAL MIG 171 w/ Multiple Mods.WSME-200 AC/DC TIG PULSE/MMACUT-50 PLASMA
Reply:Here is an attempt at a video of the display:Thanks. BurtHF DUAL MIG 171 w/ Multiple Mods.WSME-200 AC/DC TIG PULSE/MMACUT-50 PLASMA