My machine is welding super hot not matter what I have it set to. Also when I strike an arc it Boggs my machine way down. Machine has always welded great until today. Any idea of what could be going on?
Reply:Did you jump start it? These units are known for taking out the power and/or control boards if jump started.MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110
Save Second Base!
Reply:No I’ve never jumped it before. I use it daily and have never had any issues until now
Reply:PM me an email address and I'll send you the unit Technical Manual that covers troubleshooting in greater detail than the Owners Manual.Besides basic settings, the common causes of high weld output are the aforementioned power and control boards as well as the weld output sensing transducer LEM.MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110
Save Second Base!
Reply:Deleted email address to avoid excessive spam mail.Last edited by duaneb55; 1 Day Ago at 09:11 AM.
Reply:Email sent.MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110
Save Second Base!
发表于 2022-10-9 15:51:39
