Jeep Door Wall Bracket

admin

First off I'm barely a hobbyist and typically weld things for fun or out of desperation and repair. I decided to make this wall bracket to hang a pair of Jeep half doors or full doors depending on what's not being used.  I'm not done yet and need to finish the parts which are only tack welded in place to fitment.    It's been fun and it works as intended.





Old Lincoln Weld-Pak 100 MIG conversion Vulcan 220 Omnipro
Reply:


Old Lincoln Weld-Pak 100 MIG conversion Vulcan 220 Omnipro
Reply:Nice Job!Lincoln 330MPXLincoln Power Mig 256Lincoln LN-25X Wire FeederMagnum PRO 250LX GT Spool GunLincoln AC/DC 225¼ Ton of Torches OFC-A OFG-AAir Carbon Arc Gouging CAC-AEverlast 62i Plasma CutterIngersoll Rand T-30 14hpInstagram: #Freebird Welds
Reply:Great ideawww.FirehouseFabricators.comZachMillermatic 255Lincoln SW200Hypertherm Powermax 45xp2x4 CNC Plasma Table.
Reply:

Originally Posted by Flyer58

First off I'm barely a hobbyist and typically weld things for fun or out of desperation and repair. I decided to make this wall bracket to hang a pair of Jeep half doors or full doors depending on what's not being used.  I'm not done yet and need to finish the parts which are only tack welded in place to fitment.    It's been fun and it works as intended.






Reply:Looks great Dave

Originally Posted by Flyer58