|
|
I have a 04 Miller 251 thats not getting gas past 20 cfh. Before 20cfh the solenoid works. But past 20cfh it quits. Ive replaced ( solenoid, liner, regulator) Ive checked all the hoses. Until I tested the wires that run to the solenoid. There getting 16.4v Im lost as to what my next steps should be. Do I get a new circuit board?
Reply:It could the solenoid or the PC board. Need to check out solenoid to see if workingDave
Originally Posted by Exsrvs15
I have a 04 Miller 251 thats not getting gas past 20 cfh. Before 20cfh the solenoid works. But past 20cfh it quits. Ive replaced ( solenoid, liner, regulator) Ive checked all the hoses. Until I tested the wires that run to the solenoid. There getting 16.4v Im lost as to what my next steps should be. Do I get a new circuit board? |
|
发表于 2022-6-20 15:51:32