Lincoln Cobramatic K1587-1

admin

Anyone have any info or use one of these before that could tell me about it. Im going to be selling it, But I dont know where to start. I seen newer models going for a decent amount. But Im not 100%I got it through a trade for a wood burner that I used about 10 times in about 3 years.


Reply:do you have the manual? might check with lincoln electricidealarc 250/250 ac-dc tigidealarc 250/250 ac-dc tig #2 used for sticklincoln sp100hh125dual arbor grinder polisher30 yrs of hand tools52 pitch blocks 6p-26prake gauge -pitch gaugeG&D prop repair 918-207-6938Hulbert,okla 74441
Reply:I do not have the manual. Only info I have is whats on the case. :\ I find it strange I cant find anything online with the same model number.
Reply:I found a PDF file of the Manual. http://www.lincolnelectric.com/asset...OLN3/IM597.pdf
Reply:its a a rebadged MK products cobramatic feeder cabinet. http://www.mkprod.com/    I know that MK push pull feeders with the guns will sell all day long for a grand.   Without the gun i cant begin to speculate the valueVantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.
Reply:well damn, I dont have a gun with it. Safe to say I got a good deal on it, since I traded a wood burner for it. I only payed like 100$ for the wood burner too! I need to sell it/trade it for a decent mig. Thats why Im looking for a price.
Reply:It'd be hard to get rid of without the gun, imo.
Reply:Well someone offered 200$ that wanted it when I did. But I just don't wanna sell it to cheap. Maybe I'll out it up on CL for trade. Maybe get some oxy/act and torches for it? Idk I guess I can hope someone needs this exact thing. lol
Reply:Anyone else? Guesstamites?
Reply:i would say that the $200 is a fair price used an in unknown condition.   you might get lucky putting it on ebay with a reserve but unless someone has a dead one or two guys get crazy over it you might not get anything.Vantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.
Reply:would it be worth it for me to by a gun, then sell the both of them?
Reply:Might be no welder, but sound like you are a gambler.still dont know if it works tho right?In the words of the great philosopher Quagmire.Gigedy Gigedy Gigedy Gigidey Goo.
Reply:i DOUBT it,  the gun is the pricey half of the setup.    I think a prince gun with cables retails for around a grand.Vantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.
Reply:Haha yeah, I won't be buying a gun then! I'll just get the few hundred that was offered.
Reply:do you still have the cobramatic i would be interested.


Reply:I traded it for some tanks and a cutting torch/gauges/new hoses sorry!
Reply:I have one complete with the gun 14' lead and gas hose I am taking offers on. in GREAT condition and DOES work. Well.
Reply:No way where are you located?Vantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.
Reply:Hello, do you still have it and do you know if it has a power source?
Reply:

Originally Posted by MAZEN2020

Hello, do you still have it and do you know if it has a power source?