My spare time project lately.
Attached Images Gear: Esab power compact 205 with tbi industries torch BOC Smootharc 185dc tig Miller Syncrowave 350LX
Reply:That’s only the first coat of primer on the table. It’s PA10 red oxide. Finish coat will be Marine enamel in Atlantic Grey.Gear: Esab power compact 205 with tbi industries torch BOC Smootharc 185dc tig Miller Syncrowave 350LX
Reply:Looks great 👍 Dave
Originally Posted by William Payne
That’s only the first coat of primer on the table. It’s PA10 red oxide. Finish coat will be Marine enamel in Atlantic Grey.
Reply:Nice Job! Lincoln 330MPXLincoln Power Mig 256Lincoln LN-25X Wire FeederMagnum PRO 250LX GT Spool GunModified Lincoln 225¼ Ton of Torches OFC-A OFG-AAir Carbon Arc GougingEverlast 62i Plasma CutterIngersoll Rand Type 30 14hpInstagram: #Freebird Welds
Reply:Looks good!Is that a left handed drill press in that last picture? (on the pallet to the right)Sent from my Lincoln Buzzbox using Tapatalk
Reply:Double post.Gear: Esab power compact 205 with tbi industries torch BOC Smootharc 185dc tig Miller Syncrowave 350LX
Reply:
Originally Posted by 52 Ford
Looks good!Is that a left handed drill press in that last picture? (on the pallet to the right)Sent from my Lincoln Buzzbox using Tapatalk
Reply:
Originally Posted by William Payne
mNo no its a normal orientation just has a lot of levers.
Reply:
Originally Posted by 52 Ford
Makes sense By the way, I vote for Miller blue pinstriping on the welding table.
Sent from my Lincoln Buzzbox using Tapatalk
Reply:Coat 2 primer done. Have primer left over so will see how it looks before I put finish coats on. Gear: Esab power compact 205 with tbi industries torch BOC Smootharc 185dc tig Miller Syncrowave 350LX
Reply:
Originally Posted by William Payne
Haha. No pin striping. Im trying to stay away from that. Its cool but I like the professional industrial grey look. It will be a grey when finished.
Reply:Now to move into dinning room.Dave
Originally Posted by William Payne
Coat 2 primer done. Have primer left over so will see how it looks before I put finish coats on.
Reply:
Originally Posted by Insaneride
Looks good from here Never heard your corner of our world thoDon't weld the wheels tho and don't ask how I know whyLooks good from here
Reply:I go either route depending on the situation
Sent from my iPhone using Tapatalk:
Reply:I’m not going to put wheels on it. This will be living in one spot.Gear: Esab power compact 205 with tbi industries torch BOC Smootharc 185dc tig Miller Syncrowave 350LX
Reply:
Originally Posted by William Payne
Im not going to put wheels on it. This will be living in one spot.
Reply:Just use a forklift it very portable. Dave
Originally Posted by William Payne
I’m not going to put wheels on it. This will be living in one spot.
Reply:
Originally Posted by smithdoor
Just use a forklift it very portable. Dave
Reply:It's a thing of beauty. One spot is good. There is a lot of interest in hammering on table but claiming to one bolted to the floor gets used a lot. I like the size/shape/type of the fop.Last edited by Sberry; 3 Days Ago at 01:10 PM.
Reply:Great 👍 Dave
Originally Posted by Lis2323
Sent from my iPhone using Tapatalk
Reply:
Originally Posted by smithdoor
Just use a forklift it very portable. Dave
Reply:
Originally Posted by William Payne
I did put the eyebolt hole in it to move it around into place. Plus the top was ridiculously heavy and was the easiest way to lift it.
Reply:
Originally Posted by William Payne
I’m not going to put wheels on it. This will be living in one spot.
Reply:
Originally Posted by whtbaron
You'll be ok as long as the bottom is open... as soon as you put a shelf down there, you need to be able to move to clean under it.
Reply:
Originally Posted by Lis2323
He'll be fine as long as he has compressed air. Blow jobs are your friend....Sent from my iPhone using TapatalkAll those tables are niceRetired Old GuyHobart 210Lincoln AC/DC 225/125 Tombstone Evolution 14 Saw
Reply:
Originally Posted by Lis2323
what thickness is the plate?Sent from my iPhone using Tapatalk
Reply:
Originally Posted by whtbaron
You'll be ok as long as the bottom is open... as soon as you put a shelf down there, you need to be able to move to clean under it.
Reply:
Originally Posted by William Payne
1 inch
Reply:Welcome to the 1 club. Miller 211Hypertherm PM 451961 Lincoln Idealarc 250HTP 221 True Wisdom only comes from Pain.
Reply:
Originally Posted by John T
Looks like an old road plate (construction)???I’ve seen guys make tables out of those before. There is always the criticism that those are not dead nuts flat. But it’s not like your building spaceships for NASAIt’s flat enough to get the job done. Anyway looks great.
Reply:
Originally Posted by John T
Welcome to the 1” club.
Reply:here's mine
Sent from my iPhone using Tapatalk:
Reply:
Originally Posted by Lis2323
here's mine
Sent from my iPhone using Tapatalk
Reply:
Originally Posted by Lis2323
Sent from my iPhone using Tapatalk
Reply:
Originally Posted by William Payne
You win haha. What do you use your table for? Id love to see it.
Reply:Nice I like that.Gear: Esab power compact 205 with tbi industries torch BOC Smootharc 185dc tig Miller Syncrowave 350LX
Reply:Here's the wood top one ...
the big vise is perfect for "tweaking" pieces when the hydraulic press would be overkill. Sent from my iPhone using Tapatalk:
Reply:Awesome what kind of work do you do?Gear: Esab power compact 205 with tbi industries torch BOC Smootharc 185dc tig Miller Syncrowave 350LX
Reply:
Originally Posted by William Payne
Awesome what kind of work do you do?
Reply:
Originally Posted by Lis2323
Whatever I feel like. This is my hobby/retirement shop.
Sent from my iPhone using Tapatalk
Reply:One thing I am going to do with the top of my table is to keep it clean and tidy is cover the bare top in dykem blue. It’s an old school trick that I’ve had a few old timers tell me about and TXSVIKING on YouTube does it as well. Also I have welded a 304 stainless steel lug to the frame of the table for ground. I wanted something that would not rust causing a bad ground.Gear: Esab power compact 205 with tbi industries torch BOC Smootharc 185dc tig Miller Syncrowave 350LX
Reply:It depends on your wife's age If she is in the teens maybe 20's it will fly.Later we call your new hatDave
Originally Posted by William Payne
That is a beautiful bench. I want to do a nice rustic top like that for my kitchen table.
Reply:
Originally Posted by William Payne
Awesome what kind of work do you do?
Reply:
Originally Posted by William Payne
One thing I am going to do with the top of my table is to keep it clean and tidy is cover the bare top in dykem blue....
Reply:
Originally Posted by John T
He posts pictures on the internet .
Sorry LisCouldnt resist
Reply:
Originally Posted by John T
He posts pictures on the internet….
Sorry LisCouldn’t resist…
Reply:
Originally Posted by smithdoor
It depends on your wife's age If she is in the teens maybe 20's it will fly.Later we call your new hatDave
Reply:Just remember not to use as a dinning table after you are married. It ok to use for dinning before marriage 💑. Dave
Originally Posted by William Payne
Single with no kids. I just do what I want haha.
Reply:
Originally Posted by William Payne
Haha. No pin striping. Im trying to stay away from that. Its cool but I like the professional industrial grey look. It will be a grey when finished.
发表于 2022-5-19 11:02:28
