WTS/WTT Miller XR control wire feeder

admin

Miller XR control wire feeder s/n LC201436https://www.millerwelds.com/files/ow...O1594L_MIL.pdfTakes up to 45 lb spools of aluminum. I'll post some pictures when I got some taken.So, short answer is my power sources won't power this, and it's really only good for aluminum welding. Doesn't come with the expensive alumapro gun. I'm looking for a simpler MIG feeder for steel wire.I already have an aluminum setup that works, (MK Cobramatic system) so this is redundant to my needs. It has the Miller 14 pin connection plug and runs on 24v A/C. It has a 10 pin connection plug for the gun.I have seen these priced and selling for 1000.00 on ebay, if you used the advanced search function, so 800.00 is my asking price. All I really want is a decent trade for it, and I don't mind if you get a little better deal than me. I would prefer a FTF meetup for the trade. I'm located 45 minutes drive from Dothan, AL. Near Ft. Rucker, AL. about 1 hr drive from the Florida border.Let me know what you got to trade and where you're located. I'm looking for a wire feeder that runs on 115v or 42v, so an older Lincoln feeder would be nice. I will remove this ad when it's gone, so if you can read this, that means it's still available. PM me for phone # and more specifics.Andy