Sanrex welders

admin

Sanrex made thermal Arc years ago. Now they make their own. Anyone have one. I am wondering how they match up to some other brands. Thanks
Reply:I haven't followed them in years and I'm not a welder.  However, they did make high-quality stuff for TA.  And they do or do make their own power  supplies and semiconductors.  I mean very high-power power supplies. How about a 15V, 15,000Amp supply?  Or a 3 MegaWatt unit for plasma heating?  They have another 1000V, 3000A unit. I can't vouch for their current welders as far as features and stuff.  I do believe that they are quite expensive.  https://www.ebay.com/itm/SanRex-Sana...-/233273106617"USMCPOP" First-born son: KIA  Iraq 1/26/05Syncrowave 250 w/ Coolmate 3Dialarc 250, Idealarc 250SP-175 +Firepower TIG 160S (gave the TA 161 STL to the son)Lincwelder AC180C (1952)Victor & Smith O/A torchesMiller spot welder
Reply:I have been welding for 20+ years. I have used all the brands also. The first time I struck an arc on a thermal arc DC machine I was like Wow. That is amazing. The AC/dc machine I have now wasn’t as good but still better than miller/Lincoln. I am leaning towards them again but they are pricy. But if you have ever used one you would understand. Simply amazing machines.
Reply:Interesting equipment. I don't recall hearing about Sanrex before so I looked around. Appears the U.S.A. base is in Long Island N.Y. and may be where some service would be done. I don't know if there are other service locations. That ebay seller Oldendum listed is a dealer in GA. They also have a unit that looks like it would compete if not beat the Lincoln square wave 200: https://www.ebay.com/itm/233273017104. Called a 180 but the specs say it outputs 200 amps.Foot pedal is extra but comes with controls of some sort on the torch.Ernie F.
Reply:

Originally Posted by summeyracing

I have been welding for 20+ years. I have used all the brands also. The first time I struck an arc on a thermal arc DC machine I was like Wow. That is amazing. The AC/dc machine I have now wasn’t as good but still better than miller/Lincoln.
Reply:I have a thermal arc 185tsw. Great machine. Basically an older sanrex. I just wonder if they did like most companies do and went cheap to increase profits
Reply:Hard to know, I looked around a bit and not too much information about them. Sounds like they make the electronics parts (Japan) and you would like to think for the price its quality industrial. But I'm not trusting of any manufacturers any longer because they all source globally due to costs/profit. That doesn't mean products can't be good as long as the quality is controlled and are engineered properly in the first place.I'm in the market for a inverter AC/DC TIG in the output and size/weight range of their (Sanrex) 300AP, that's why I looked into it. The specs look pretty good. Few things so far I noticed: No response to questions via email, doesn't appear to have an outlet to power a water cooler (one of the questions), not crazy about the ABS plastic case (not a real big deal), and why does it draw aprox. twice the amps input as the competitors (Miller Dynasty 280, Lincoln Aspect 375-really a 250 amp on single phase?  Here is their PDF on the 300: https://www.sanrex.com/wp-content/up...8/11/300AP.pdfI also inquired if I could demo the machine. Appears they have dealers in N.Y., Mass. and the main headquarters / repair facility is in on Long Island. All a reasonable distance for me to drive to.I may try the phone but I still want more information. Support in the event of a problem is also high on the priority list. Lots of ifs here

.Ernie F.
Reply:

Originally Posted by metalman21

Hard to know, I looked around a bit and not too much information about them. Sounds like they make the electronics parts (Japan) and you would like to think for the price its quality industrial. But I'm not trusting of any manufacturers any longer because they all source globally due to costs/profit. That doesn't mean products can't be good as long as the quality is controlled and are engineered properly in the first place.I'm in the market for a inverter AC/DC TIG in the output and size/weight range of their (Sanrex) 300AP, that's why I looked into it. The specs look pretty good. Few things so far I noticed: No response to questions via email, doesn't appear to have an outlet to power a water cooler (one of the questions), not crazy about the ABS plastic case (not a real big deal), and why does it draw aprox. twice the amps input as the competitors (Miller Dynasty 280, Lincoln Aspect 375-really a 250 amp on single phase?  Here is their PDF on the 300: https://www.sanrex.com/wp-content/up...8/11/300AP.pdfI also inquired if I could demo the machine. Appears they have dealers in N.Y., Mass. and the main headquarters / repair facility is in on Long Island. All a reasonable distance for me to drive to.I may try the phone but I still want more information. Support in the event of a problem is also high on the priority list. Lots of ifs here

.
Reply:Was the Georgia rep MooreWPS.com, Joseph Moore? He is listed on the SanRex site as a distributor, and has ebay listings for the 180AP and the 300AP. (I don't get why SanRex has the 200AP.)I spoke to a fellow at the Port Washington N.Y. (Long Island) location. He said these units are identical to the original Thermal Arc units. I emailed a dealer in N.Y., no stock but offered to send a salesman to my shop for a demo!Ernie F.
Reply:Sanrex told me that the machines were very close internally but the boards were different. Yes that was the guy in Georgia. He has a new old stock 185tsw but wants full price for it. Why would someone pay full price for something with no warranty. Wanted to hear from one more guy on parts but it looks like I am buying a new welder
Reply:I’m going to dredge this old thread up to ask if anyone has had real world experience with one of these Sanrex units? I’m looking at a used 300 AP and I’m hoping these are as good as the old thermal arc units. I have a GMS 400 that I really like and I’m hoping these Sanrex units are in the same league.