Discuz! Board

 找回密码
 立即注册
搜索
热搜: 活动 交友 discuz
查看: 5|回复: 0

victor flowmeter hrf 2325 leaking at top of glass

[复制链接]

9万

主题

9万

帖子

29万

积分

论坛元老

Rank: 8Rank: 8

积分
293221
发表于 2021-9-7 08:23:41 | 显示全部楼层 |阅读模式
i unscrewed this and the orings look fine,, i think what is leaking is the "burst capsule"?     it seems rather ridiculous to pay 50 bucks for a rebuild kit just for one little part.  also, the rebuild kits i have found are for a hrf 2425,  vs my 2325,   i sorta assume the kit is interchangeable with my older regulator.   can anyone confirm? does anyone know where to just buy that part?  (at least i think that is what the problem is)i had recently turned the regulator up as high as it would go as i was trying to gas out some voles in my lawn.  (this did not work, btw)    fast forward a few months i go to do a little welding and it's leaking at the top,, i suspect the ball flew up and did something to the top of the inner tube.another question,, i see regulators on ebay for dirt cheap, the whole regulator, for like 29$.    i really don't weld much any more.    are these regulators trustworthy,,, obviously cheaply made in china i have no doubt.  thanks for any input
Reply:

Originally Posted by rockwind1

i unscrewed this and the orings look fine,, i think what is leaking is the "burst capsule"?     it seems rather ridiculous to pay 50 bucks for a rebuild kit just for one little part.  also, the rebuild kits i have found are for a hrf 2425,  vs my 2325,   i sorta assume the kit is interchangeable with my older regulator.   can anyone confirm? does anyone know where to just buy that part?  (at least i think that is what the problem is)i had recently turned the regulator up as high as it would go as i was trying to gas out some voles in my lawn.  (this did not work, btw)    fast forward a few months i go to do a little welding and it's leaking at the top,, i suspect the ball flew up and did something to the top of the inner tube.another question,, i see regulators on ebay for dirt cheap, the whole regulator, for like 29$.    i really don't weld much any more.    are these regulators trustworthy,,, obviously cheaply made in china i have no doubt.  thanks for any input
Reply:The repair kit for the 2325 is not the same as the 2425.https://regulatortorchrepair.com/pro...kit-0790-0120/
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|小黑屋|DiscuzX

GMT+8, 2025-12-19 06:30 , Processed in 0.097345 second(s), 18 queries .

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表