|
|
Took a chance and bought an estate sale Pro Mig 140. It's got some parts missing.So trying to find a parts diagram is frustrating to say the least. Since I don't know what to call it, but I know where it is, ordering parts is a crap shoot. I've been to the Lincoln parts page, it's not much help at all.https://www.lincolnelectric.com/en/Service-NavigatorThe first part I need is the Wire Reel Spindle, which is I believe part number 9SM15445-1. I found one on Amazon here: https://www.amazon.com/Lincoln-inch-...2674948&sr=8-2The 2nd part I need is a fitting for the gas line at the rear. There is a female fitting at the back of the machine; turns out it isn't National Pipe Threads as I hoped. I found a gas line assembly part number 9SS19303. There is a version available here for $60: https://www.weldingandcutting.com/Ga...-p/4300138.htm The thing is I only need a pipe fitting at the back of the machine for my air hose from my existing CO2 regulator. The link to the air line says that it's 5/8-18 fittings. I've looked at McMaster-Carr, no 5/8-18 fittings.Anyone have any ideas here for a fitting besides buying an air hose I don't need?Where can I find a decent parts diagram and parts list for this machine?Thanks,America's enemies best ally,the Democratic Party!
Reply:Lincoln usually requires the code number to get the correct parts manual.
Reply:Where do I find the code number?Their parts page, linked above, calls for "Code Number or Name". I've been entering "Pro Mig 140".America's enemies best ally,the Democratic Party!
Reply:Look on the welder.
Reply:
Originally Posted by Welder Dave
Lincoln usually requires the code number to get the correct parts manual.
Reply:Here's a link : https://www.mcmaster.com/catalog/127/3672 Welding Hose Fittingsor just buy an inert gas hose, and or adapter for you regulator.Airco 250 ac/dc Heliwelder Square waveMiller Synchrowave 180 sdMiller Econo Twin HFLincoln 210 MPDayton 225 ac/dcVictor torchesSnap-On YA-212Lotos Cut60D |
|
发表于 2021-9-1 23:18:05