Tig filler holder w bottle bracket

admin

Good morning,I wrapped this up yesterday.  This is my poor mans scratch start rig.  My shop space is very limited which requires all tool space to be hyper compressed and dual or triple used. The rig rolls under the bench which required the bottle bracket to mount to the side of the cart.  Of course the filler is long which required yet another side mount.  Here is my variation of the PVC w maple end caps and some left over steel chain from an old fluorescent light fixture.  It might provide some ideas for others. Regards




Last edited by Continuum; 04-25-2021 at 06:38 AM.
Reply:Nice, only need about 8 more now.
Reply:Space may be limited but very clean and well organized.  It shows in the fit and finish of the thing you make, that you enjoy the space you have.  It may even get on the cover of “DIY Shops of America” May 2021 issue.


And you did not demo the swing out shelving under the top.Last edited by acourtjester; 04-25-2021 at 09:20 AM.DIY CNC Plasma table USB BOB Price THCHypertherm 65Everlast PowerTig 255 EXTMiler 180 Mig13" metal latheMill/ DrillECT, ECT,
Reply:Nice work and especially attention to detail

Sent from my iPhone using Tapatalk:
Reply:Thank you all for the kind words.
Reply:Am I the only one that can't figure it out?  I have to ask, what are the two paint cans with corks in their lids??
Reply:

Originally Posted by Weldalittle

Am I the only one that can't figure it out?  I have to ask, what are the two paint cans with corks in their lids??
Reply:

Originally Posted by acourtjester

Space may be limited but very clean and well organized.  It shows in the fit and finish of the thing you make, that you enjoy the space you have.  It may even get on the cover of “DIY Shops of America” May 2021 issue.


And you did not demo the swing out shelving under the top.
Reply:

Originally Posted by Continuum

Hot scraps and weld rod stubs.  That way it keeps me from mixing w trash and causing a fire.  I let them cool and dump s with Monday’s trash.  Nearly learned the hard way making charcloth for backpacking.  I set the carbonized cloth on a plastic lid.  It wasn’t quit cool.  It smoldered.  I kept smelling melted plastic.  After I found it I vowed I’d never do something stupid like that again.  So I’m focused on fire hazard like a laser.  Still wonder if I’m missing something or the next disaster.      These are going to change too.  Got some new cans that will get receivers to mount to the table.