spoolgun on tig machien

admin

I just picked up a square wave 335 and was wondering if it possible or fool ish to try to use this to power a spool gun ??Hit it like you live
Reply:not possible, tig/stick machines are constant current and mig are constant voltageStangnetShop Full Of Stuff. Joey
Reply:so you can tig weld with a mig machine but not mig with a tig machineHit it like you live
Reply:SmithyI have asked the same question over on the Miller "Ask Andy" site.  Here is the thread...http://www.millermotorsports.com/mbo...owave+spoolgunI was looking to add a spoolmatic 30A to my syncrowave 250dx.  I found that Miller offered an adapter (WC-115A) to allow a cc machine (syncrowave) work like a cv machine.  I was told that since I had a squarewave machine that it would not work very well.  If I had a stick machine w/o squarewave then it would work much better, but not great.  I think I will just get the spool gun for my Lincoln PM200.Hope this helps.BrianLincoln Mig 215Miller 211Victor Torch SetMiller Maxstar 200SDMiller Syncrowave 250DX Tig runnerMiller Trailblazer 302 running on LPMiller Extreme 12 VS SuitcaseEllis 1600 BandsawMiller xmt350 CC/CVLincoln Vantage 300