|
|
I have a mm175 using 75/25 gas, i weld (or attempt to) mostly 1/8 to 1/4 in. at times i may weld thicker metal but not much... I have been using .023 wire it came with the welder... lots of it.... anyway time to buy wire,what would a good size be for what I'm doing...
Reply:i like .035
Reply:thanx Chopper... thats what I bought..all I had to do was turn my roller over to the 30-35side (thought I may have had to buy new ones)Thanx again Marty.. |
|
发表于 2021-9-1 01:01:03