|
|
I know I had seen something in the past about regulators that folks liked. The nmae that sticks in my head is Koike...something. Anybody have a clue about this and if you do what are your comments/experiences with these. This wil be going on my Miller 251.Thanks...Don
Reply:Smith, Harris and Victor are the name brands here.DennisThermal Arc 185-TSWMillermatic Challenger 172VictorO/AAtlas Craftsman 12 by 24 LatheEsab PCM-875Wholesalem Tool Mill-Drill
Reply:i use a victor reg and flow meter for the tig machine and have harris regs for my o/a rig
Reply:I have a Victor , a "GENERIC BRAND ", yes the Brand name is GENERIC,and 2(two) Koike flow meters. I much prefer the Koike floe meters. they are precision calibrated . no guess work, no stupid balls floating to mess with & you don't have to worry about about keep it perfectly straight up, like you do with the ball type . They are a pain in the kazoo. ( A#S) ........Also , i PERSONALLY don't like the kind that looks like a acetylene regulator.I use the koikes for argon& c02.[SIZE="5"Yardbird" |
|
发表于 2021-9-1 00:59:51