|
|
What is the best way to keep welds free from air pockets,open creases,and the possibility of cracking on a stress test on a horizontal weld with a 1'' gap.
Reply:Originally Posted by Brian42What is the best way to keep welds free from air pockets,open creases,and the possibility of cracking on a stress test on a horizontal weld with a 1'' gap.
Reply:That way you can be sure of 100 percent penetration. duh. Just kidding.
Reply:Originally Posted by Brian42What is the best way to keep welds free from air
Reply:1" ......................... put in a 3/4 rod and weld both sides of it........ I sure hope you are not wording this question correctly
Reply:stinger in one hand and another rod in the other and feed it in , kinda like a tig. 1" is a big gap what the he!!are you doin?DewayneDixieland WeldingMM350PLincoln 100Some torchesOther misc. tools
Reply:1" gap... can't be done, don't even try. |
|
发表于 2021-9-1 00:59:24