ventilation system

admin

Looking to build or buy a small ventilation set up for my shop. Looking for something simple and not to costly. Been looking on the net for prices and ideas and thought I put this post up and see if anyone had any ideas.Miller DVI2Lincoln Precision Tig 225Thermodynamics Cutmaster 38Everything else needed.
Reply:Visorblue suggested a rangehood. Seems like a good idea. Cheap, decent airflow. Or are you trying to exchange the air of the whole shop?Craftsman 230a Buzz-box,  Lincoln 140T & 180T, Century K2789, PUROX W202 O/A14" cheapo chop saw that cuts straight and square!A toolbox of the cheapest Chinese tools money can buy"Real" tools all old reliable Husky/Craftsman/Proto stuff
Reply:An old ventilation fan from a hot air furnace is quite effective if you want general ventilation.  They are relatively quiet.
Reply:I was going to buy something like this and put it right next to my welding area, through the wall: http://www.teksupply.com/farm/suppli...;pg105551.htmlJohn -  fabricator extraordinaire, car nut!-  bleeding Miller blue! http://www.weldfabzone.com