Zaps 3'Rd Tig Class..

admin

Ok you guys decide..April 14OrApril 28I had originally planned on doing it April 21'ST..BUTThere is a Joe Satriani concert I'm going to Fri the 20'TH..And I will probably still be ZZZZZZZZZ come 9 A.M. Sat.. Either works for me..So.....Fight it out between yourselves.. Preferably Tig Torches at 10 paces...  ...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:At this point I don't think it will matter to me._________________Chris
Reply:My little monsters b-day party is the 15th, so I'm good for the 14th.John -  fabricator extraordinaire, car nut!-  bleeding Miller blue! http://www.weldfabzone.com
Reply:Actually guys the show is on the 6'th acording to Mrs zap...Me bad.. But whatever...We will still go with the 14'th or 21'st...What do I know... She got the tix.. ...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Is it open to a beginner TIGger and anywhere near Philadelphia?I'll bring the beer! (for after the torches and sharp tools are put down of course).
Reply:The sooner, the better...that way I don't forget. John -  fabricator extraordinaire, car nut!-  bleeding Miller blue! http://www.weldfabzone.com
Reply:This sucks, I would love to go for this april but don't think it will happen due to my current work load. Will try for a later one.Hopefully Chris and John may go to another.Miller DVI2Lincoln Precision Tig 225Thermodynamics Cutmaster 38Everything else needed.
Reply:anyday is as good as another to me
Reply:Originally Posted by jamlitThis sucks, I would love to go for this april but don't think it will happen due to my current work load. Will try for a later one.Hopefully Chris and John may go to another.